Drive mode selector knob on steering wheel
Has anyone attempted to remove and paint the knurled drive mode ring? pending the accent color (dials, seat belt, etc.), I think it would really tie it all together and give the interior a more sporty look.
I found the attached image on the TechArt website. I think the mix of colors in this case is not in good taste. However, I do think this red knob by itself, on a stock GT sport steering wheel, along with guards red seat belts and dials, would look really nice. https://cimg4.ibsrv.net/gimg/rennlis...403855fc96.jpg |
I was wondering the same thing, especially after seeing the following one painted in Irish Green, which was a CXX Option:
https://cimg1.ibsrv.net/gimg/rennlis...1cdb2468ac.jpg I think that the steering wheel needs to be removed since I recall when I had mine off it appeared the entire assembly could be removed but at the time I was not considering it so I did not pay close attention. Maybe a parts diagram would help. |
Does this steering wheel work on the 981? The drive mode selector will work? Thought it only came on 982/991.2 cars
|
Posted in the wrong forum? That's great for 718 owners, or one of the .0002% of folks who did a conversion.
For what it's worth, I actually like that first pic. Would like great in a Miami Blue car. |
I actually did this recently, I bought a spare knob off eBay, and tried to take it all apart, I got half way thru it but I was not able to pull out just knob off the whole assembly (it has these 4 internal tabs and as much as I tried, I could not pry them to free up the knob without risking breaking the whole switch). I put it back together and went on and masked it all off allowing me to paint the knob. I used a 2K spray can and went for it. I think it actually turned out really nice, but if I ever get tired of it, I still have the original to swap. If anyone figures out how to disassembly the knob, please post it. There has to be a way cause I see TechArt has wrapped the knob in Alcantara too.
https://cimg8.ibsrv.net/gimg/rennlis...a5187716e.jpeg https://cimg0.ibsrv.net/gimg/rennlis...54ad8fe1c.jpeg https://cimg1.ibsrv.net/gimg/rennlis...7dd9c9e8a.jpeg |
The knob pulls straight off - took me 2 seconds to take off, get painted and push right back on:
https://cimg2.ibsrv.net/gimg/rennlis...7cd82a6787.jpg |
Originally Posted by Bob Z.
(Post 17267842)
The knob pulls straight off - took me 2 seconds to take off, get painted and push right back on:
No way! mhhh... I guess I’m a wimp. I tried pulling straight up with no luck. 🤷🏻♂️ thanks for posting. |
All times are GMT -3. The time now is 12:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands