WTB: 55# injectors
#1
Thread Starter
Hey Man
Rennlist Member
Rennlist Member
Joined: Jul 2003
Posts: 16,525
Likes: 188
From: Nor Cal, Seal Rock, OR
WTB: 55# injectors
I'm looking for a set of new (best source?) or used serviced or non-serviced 55# injectors for an 86 951. Anyone have a old set or know the best source for the Siemens. Which injector seems to have the best history for the application ballast or no ballast?
Thanks
Thanks
#2
Defending the Border
Rennlist Member
Rest In Peace
Rennlist Member
Rest In Peace
Joined: Aug 2003
Posts: 17,541
Likes: 2
From: Sun Diego
Five O Motorsports
$325 a year and a half ago for Siemens, can't find the p/n though, with resistors.
$325 a year and a half ago for Siemens, can't find the p/n though, with resistors.
Last edited by ibkevin; 08-01-2013 at 01:06 PM.
Trending Topics
#8
I have a set of 52# (550 cc/min) RC Engineering injectors - less than 500 miles on them. PM me if you are interested.
http://rceng.com/prices.htm
http://rceng.com/prices.htm
#9
Originally Posted by stv951
That was quick. Thanks Brian.
Do I need anything else, or are these a direct fit ?
Do I need anything else, or are these a direct fit ?
#10
Thread Starter
Hey Man
Rennlist Member
Rennlist Member
Joined: Jul 2003
Posts: 16,525
Likes: 188
From: Nor Cal, Seal Rock, OR
Originally Posted by Skip Wolfe
I have a set of 52# (550 cc/min) RC Engineering injectors - less than 500 miles on them. PM me if you are interested.
http://rceng.com/prices.htm
http://rceng.com/prices.htm
#11
Originally Posted by beab951
Direct fit. I just had to do some digging for injector P/Ns so I had the info still in hand. Using ballest resistor is a good idea if you intend to run the car hard for extended period. It is an easy and cheap modification.
Where can I get these resistors ? Whats their type ? Ohms ?
#14
I have a set of 55# Siemens with proper resistors. About 3K miles on them IIRC. I bought a used MAF that is set up for 72#'s so these need to go. $200 firm, PM if interested.
TIA
TIA