Carrera51

OG Racing Roll Cage and Roll Bar BLOWOUT Give Away!

Need a roll bar for your DE car? Need a roll cage for your Chump, LeMons car? We have some remaining old stock of Auto Power and OG Racing branded roll bars and roll cages as well as front sections only and it is time for them to go to a new home.

So if you have one of the following models, you can pick up a full cage or roll bar for $1.00, plus tax. This is not a typo, and no, I haven’t just returned from a weekend of partying in Colorado. You can pick up a roll bar or roll cage for $1.00 plus tax. Some are missing mounting hardware, but even at this price you are still ahead even if you have to make up some plates. Pick up only at our Sterling warehouse location. No shipping available. No delivery available. You may call to check what's left and we will put one on hold for same day pick up. We will not put on hold for pick up at a later date. Limit of one to a customer/group/family/herd/gaggle/pride. Price is good until the last one leaves the building.

OG Racing Roll Bars and Roll Cages. These are 1.75” diameter and DOM .120 wall thickness and the cages are legal for PCA Club Racing. Can be used with other sanctioning bodies with the addition of a second door bar or NASCAR door bars.

993 Coupe roll bars: 5 in stock
993 Coupe roll cage: 2 in stock

964 Coupe roll bars: sold out
964 Coupe roll cage: sold out
964 Coupe extra door bars: 1 in stock

944 Roll Bar: sold out
944 front sections: sold out
944 extra door bars: 1 in stock
944 front section mounting plates: sold out

911 (67-89) front sections only: sold out
911 (67-89) extra door bars: sold out


Auto Power Roll Bars and Roll Cages: These are 1.75” diameter and .120 wall thickness.

AU603417: 67-94 Targa roll bar: 1 in stock
AU603457: 993 roll bar: 2 in stock
AU603458: 993 weld in roll bar: 3 in stock
AU6038011: 964 coupe and cabriolet bar: 1 in stock
AU6038002: 914 sold out
AU6034607: 993 Cabriolet roll bar: 1 in stock
AU83340: 911 cage: Sold Out

AU60902C: E36 Coupe U-weld roll cage: SOLD

ProCoach

Wow! Merry Christmas to you, Bill and the rest of the OG crew, too!

Carrera51

These are already moving. Available quantities revised.

Carrera51

These are moving fast. Quantities available updated.

Carrera51

Not many left. Please see original post for updated stock.

Carrera51

3 more picked up today. Quantities updated in original post.

Carrera51

We sold over 50 of our remaining roll bars and cages. Supplies are dwindling fast.

Quadcammer

silly question but are the OG ones bolt in or weld in?

AOW162435

They are bolt in, meant for use with backing plates.



Andreas

Carrera51

The main hoops of the cages and the roll bars themselves require nut plates to be welded in where the feet will sit along the longitudinal rails on the sides of the car. Or just weld a plate in and then weld in the bar. The legs that rest on the wheel arches have a plate that goes below the foot and one that will go on the outside in the wheel arch. Holes need to be drilled and bolts run through and capped with nuts on the backside.