Looking for Race Shop in Portland, Oregon area
#1
Drifting
Thread Starter
Join Date: May 2001
Location: Portland, OR
Posts: 2,779
Likes: 0
Received 0 Likes
on
0 Posts
Looking for Race Shop in Portland, Oregon area
I want a race shop to weld in a custom cage for me. Do any of you kind folks know of one in the Portland Oregon metro area? Thank You.
#2
www.rennsportsystems.com , Steve is the
man, he's also a technical advisor on this board and is very helpful and knowledgeable. I believe he is located in Tualatin.
I have no interest or affiliation with
Rennsport, good luck!
man, he's also a technical advisor on this board and is very helpful and knowledgeable. I believe he is located in Tualatin.
I have no interest or affiliation with
Rennsport, good luck!
#3
#5
Drifting
Join Date: May 2001
Location: Villanova, PA
Posts: 2,331
Likes: 0
Received 0 Likes
on
0 Posts
I have an interest with Rennsport and Steve - he is the most helpful P-car guy I have found. He will spend as much time on the phone as it takes even though I am on the east coast and he knows he is not going to see my car in his shop. If you are looking for a shop in Portland - there is only one - Rennsport.
Here is a picture of a car Steve completely re-did:
E. J.
Here is a picture of a car Steve completely re-did:
E. J.
#7
Tabor-
Try Russ @ Racetech for your welded cage needs 503-254-6706. Also give Jeff Gamroth a call at Rothsport for his advice 503-885-9626.
I agree, Steve at Rennsport is a great guy and very knowledgable. The beautifully prepared RSR belongs to Jay Culbertson and it is my understanding that the majority of the work was done by Rothsport / Jeff Gamroth. I'm sure Steve played a role in the cars prep. but let's give credit where credit is due! It is a beautiful car!
Try Russ @ Racetech for your welded cage needs 503-254-6706. Also give Jeff Gamroth a call at Rothsport for his advice 503-885-9626.
I agree, Steve at Rennsport is a great guy and very knowledgable. The beautifully prepared RSR belongs to Jay Culbertson and it is my understanding that the majority of the work was done by Rothsport / Jeff Gamroth. I'm sure Steve played a role in the cars prep. but let's give credit where credit is due! It is a beautiful car!