Where can I buy Lexan
#3
Drifting
Join Date: Jun 2001
Location: Houston, Texas
Posts: 3,199
Likes: 0
Received 0 Likes
on
0 Posts
You can buy it in sheets from various plastic companies. That's what we did on our old '55 Chevy drag car, bought 4x8x 1/8 sheets and cut our own windows. Very Easy.
#5
1/8" for track cars, 3/16" for street.
Some suppliers on the net offer less than full sheet sizes. Here's one:
http://www.tapplastics.com/shop/prod...22049352453386
Sherwood
Some suppliers on the net offer less than full sheet sizes. Here's one:
http://www.tapplastics.com/shop/prod...22049352453386
Sherwood
#6
Rennlist Member
HI,
I brought a stock GT3 cup window to my local hardware store and they traced the front section and made some pieces from it for me, very cheaply. I can't run side windows in SCCA but there is too much drag with no windows. So I made small windows like the vent windows in the old cars.
good luck!
I brought a stock GT3 cup window to my local hardware store and they traced the front section and made some pieces from it for me, very cheaply. I can't run side windows in SCCA but there is too much drag with no windows. So I made small windows like the vent windows in the old cars.
good luck!