PCA GTC3 Legal Wing Uprights avaliable from Demon Speed Motorsports
#1
Rennlist Member
Thread Starter
PCA GTC3 Legal Wing Uprights avaliable from Demon Speed Motorsports
Hi,
Well, the news just came out
GTC rule change:
The rear wing of GTC3 cars may be raised four inches to gain better rear vision, but may not otherwise be altered or repositioned.
Demon Speed Motorsports has been making taller wing uprights of several heights and designs for two years now. We make an upright that raises the current wing height 3" that would be legal for the class now. We have these in two different designs, a DSM nuclear symbol, or a 997 style.
That said, we are currently in manufacture of wing uprights that will be 4" taller than stock and have the stock GT3 logo on them. These uprights will also be made out of slightly thicker material to compensate for the higher side forces from the wing being taller.
We expect that these would ship on or about 12/5 for any that are per-ordered while in production. You can pre-order your wing on our site here:
http://www.demonspeedmotorsports.com...ight-A-WU6.htm
Or, of course, purchase the current mid-height uprights and are in stock.
Thanks
Ed
Well, the news just came out
GTC rule change:
The rear wing of GTC3 cars may be raised four inches to gain better rear vision, but may not otherwise be altered or repositioned.
Demon Speed Motorsports has been making taller wing uprights of several heights and designs for two years now. We make an upright that raises the current wing height 3" that would be legal for the class now. We have these in two different designs, a DSM nuclear symbol, or a 997 style.
That said, we are currently in manufacture of wing uprights that will be 4" taller than stock and have the stock GT3 logo on them. These uprights will also be made out of slightly thicker material to compensate for the higher side forces from the wing being taller.
We expect that these would ship on or about 12/5 for any that are per-ordered while in production. You can pre-order your wing on our site here:
http://www.demonspeedmotorsports.com...ight-A-WU6.htm
Or, of course, purchase the current mid-height uprights and are in stock.
Thanks
Ed
#2
Rennlist Member
Thread Starter
The first batch of the PCA legal 4" rise uprights are done out of laserjet cutting. They are going over for powdercoating Monday, so everyone who has preordered a set should see their uprights shipping shortly.
Thanks
Ed
Thanks
Ed
#5
Rennlist Member
Thread Starter
Steve, that is great. I will get an invoice out to you.
Actually starting to get low on the first order quantity, so if you want some from this round you should order soon.
Thanks
Ed
Actually starting to get low on the first order quantity, so if you want some from this round you should order soon.
Thanks
Ed
#6
Addict
Rennlist Member
Rennlist Member
Ed, my order went in last night! Just standard black with the GT3 lased out.
Toby
Toby
Trending Topics
#12
Rennlist Member
Thread Starter
Too bad you are not looking for a 997.1 cup. I can certainly help you out there with about 14 still available for sale through us.
I would assume since these specifically are made to the letter of the new rule change.
Thanks
Ed
I would assume since these specifically are made to the letter of the new rule change.
Thanks
Ed
#13
Rennlist Member
#15
Nordschleife Master
Sorry Steve but we will be testing them next weekend at Sebring. 80 degree forecast. Little warm but what the heck. Our winter time runs Dec 24th through Jan 4. Then back to Sebring for Winterfest and the 6 hour Enduro (not with the Cup though)