Fabspeed header dyno sheets
#1
Rennlist Member
Thread Starter
Fabspeed header dyno sheets
Hey guys, I just finished up the install of Fabspeed long tube race headers on an 06 Cayman S. The car has no other mods and 27k miles on the clock. I just thought I would share the before and after dyno results. Now I am going to install an underdrive pulley and dyno it again. This is a superflow AWD dyno, and it does read lower that a dynojet, which is the case with most dynos. Enjoy.
The following users liked this post:
bredward (06-07-2023)
#4
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thanks for posting the results Travis! Great gains and i'm sure your customer is quite thrilled with the results
nowakm99, installation should take no longer than 2-3hrs for the headers depending on the condition of the header bolts, and shop rates vary from shop to shop. For your reference we are at $125/hr so it would likely be in the ballpark of $250-$375 for installation.
nowakm99, installation should take no longer than 2-3hrs for the headers depending on the condition of the header bolts, and shop rates vary from shop to shop. For your reference we are at $125/hr so it would likely be in the ballpark of $250-$375 for installation.
__________________
Porsche Performance Specialist
John@Fabspeed.com
215-618-9796
Fabspeed Motorsport USA
155 Commerce Drive Fort Washington, PA 19034
www.Fabspeed.com
Porsche Performance Specialist
John@Fabspeed.com
215-618-9796
Fabspeed Motorsport USA
155 Commerce Drive Fort Washington, PA 19034
www.Fabspeed.com