YseanY

Is anyone with sport bucket seats interested in bolster protectors? I've made a small run of these and have some extras left. The price of the bolster protectors is $130 per pair shipped within the 48 contiguous states.

These protectors are made in the USA and use Ultrasuede. The grey color pictured in the thread above is a very close match to our Porsche Alcantara, however, it is not 100% (I can get these made in black as well). The the protectors are attached to the bolster at 3 points below.

1. With a hook-and-loop (aka Velcro) to wrap around the belt hole near the back rest.
2. With a hook (aka Velcro) at the front to adhere underneath the cushion.
3. Two gromets tied to the seat mounts with elastic drawcords.







If you would like one, please review the 2 color choices in post 3 (black or charcoal) and make a payment of $130 to my username at gmail.com indicating the color you'd like and how many pairs.

YseanY

Also, I have developed headrest protectors for those who track and are concerned about HANS device or helmets wearing on the leather. I'm now out of these but can make some for $65 per side.





If you would like one, please review the 2 color choices in post 3 (black or charcoal) and make a payment of $65 per piece to my username at gmail.com indicating the color you'd like and how many pieces.

YseanY

The below are the pictures of the black and charcoal. it was hard capaturing the color as different lighting and angle changed the colors of both the OEM Alcantara and Ultrasuede.

BLACK - the oem leather is more of a grey black whereas the ultrasuede is more of a blue/jet black




CHARCOAL - again, the charcoal is not a 100% match, but it is close. the alcantara is more of a yellow tint and the Ultrasuede is more of a blue/green tint

Nymberg

Are these items still availiable?

extanker

try sending him a PM although i do not recall his name appearing too often

Nymberg

Cant pm for any reson, newly registered maybe!?

extanker

i tried to send him one for you but i dont think mine went through either. check with admin.

Nymberg

Thanks! If he logs on i think he will notice this.

toplabels

I did a search online and your post a while back came thru. I am interested in the bucket seat protectors for a 2011 GT3. do you make them still??

David
toplabels@icloud.com
915-726-9436

LateBraking

Sorry for the necro-bump everyone, but just wanted to ask YseanY if he still makes these. They come highly recommended from a forum member that I spoke to. Thanks!

Roadster08

Also interested if still available

Crazy Eddie

Very nice, and the price is good, the only issue is the length ?
If it were longer, it would protect the front of the bolster, where shoe's heel, tend to hit the bolster
Regards
Ed

HKDaytona

Would love to buy a pair!

irrer88

yes. Also interested in getting a set for my LWB.

Crazy Eddie

Have you seen this post?
https://rennlist.com/forums/gt4/9085...l#post13589638

from this thread ...
https://rennlist.com/forums/gt4/9085...-today-69.html