Has anybody tried this?
#1
Drifting
Thread Starter
10J x 20 Sport Techno in front wheel?
I'm considering buying four 20x10 Sport Techno wheels and running a front spacer so they clear the calipers. I'm thinking about a 10mm front spacer. Enough? I know the rears will need spacers, so they don't look out of proportion, width-wise. Is this too much hardware weight just to be able to perform front/rear rotations...or will the CTT look like a Stinkbug?
Last edited by Dilberto; 01-24-2017 at 02:15 AM.
#2
Look up my thread with mods to get 680hp. I'm running 4x 20x10 for sunmer and 4x 20x9 for winter.
I have huge brakes and they will clear calipers with about 1mm to spare. I have 5mm spacers.
I have huge brakes and they will clear calipers with about 1mm to spare. I have 5mm spacers.
#3
Racer
Spacers will not help you clear brake calipers, (unless you use some ungodly big spacers, like 6" or something)
I have spacers all the way around. I can measure them, but I believe thy are 15mm at least. Pushes the wheel flush with the wheel arch
I have spacers all the way around. I can measure them, but I believe thy are 15mm at least. Pushes the wheel flush with the wheel arch