Newbie needs Brembo ID Help
#1
Newbie needs Brembo ID Help
Hello all,
First, if this is in the wrong forum I apologize. I have acquired a set of Brembo Calipers and have not really gotten any good info on them and everyone says to post on a Porsche Forum, so here I am
Here are a couple pictures of the Calipers I have:
These have 40mm and 36mm Pistons in them. For my planned use they are a bit big. What I am hoping to find out is what they might have been from or for. Then if there is a similar design/size caliper with smaller pistons (like 28/28) that is what I would be looking for.
These were used with 330mm Rotor rings that are 28mm thick.
Any help is greatly appreciated, even if the answer is.. I have no clue
Thanks
First, if this is in the wrong forum I apologize. I have acquired a set of Brembo Calipers and have not really gotten any good info on them and everyone says to post on a Porsche Forum, so here I am
Here are a couple pictures of the Calipers I have:
These have 40mm and 36mm Pistons in them. For my planned use they are a bit big. What I am hoping to find out is what they might have been from or for. Then if there is a similar design/size caliper with smaller pistons (like 28/28) that is what I would be looking for.
These were used with 330mm Rotor rings that are 28mm thick.
Any help is greatly appreciated, even if the answer is.. I have no clue
Thanks