[ HELP ] Headers mufflers 964 ???
06-12-2007, 07:16 AM
#1
AutoX
Thread Starter
Join Date: Dec 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
[ HELP ] Headers mufflers 964 ???
Hello everybody, 
So sorry for my very bad english.
In fact, I need your help and some information in order to find/buy a full racing exhaust.
I am looking for headers mufflers ...
It's for a 964 C2 which is only use for racing tracks.
So, if you have adress to order them or if you have a complete system exhaust to sell, I am your guy
best regards
Arno
So sorry for my very bad english.
In fact, I need your help and some information in order to find/buy a full racing exhaust.
I am looking for headers mufflers ...
It's for a 964 C2 which is only use for racing tracks.
So, if you have adress to order them or if you have a complete system exhaust to sell, I am your guy
best regards
Arno
06-13-2007, 10:43 AM
#3
AutoX
Thread Starter
Join Date: Dec 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by David K.
S-Car-Go 1 3/4 x 26" headers with a Flowmaaster muffler
Yes, i have find S CAR GO.
But, their headers are 1"3/4.
And for a 3.6 L engine, it's better to have 1"2/3, until 300/320 hp.
The 1"3/4 is perfect for a 3.8 L engine.
So, I continue to look for.
Anybody have other solutions ?
thanks a lot.
Arno
06-13-2007, 11:40 AM
#5
AutoX
Thread Starter
Join Date: Dec 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by David K.
I run 1 3/4 on my 3.6 talk to S-Car-Go. 1 3/4 is right for a 3.6, 3.8 can go to 1 7/8.
If it's the outsider, them the inside diameter will be perfect.
Ouside diameter 1"3/4 = inside diameter 1"2/3.
Arno
06-13-2007, 11:53 AM
#6
Headers are normal measured from the Outside Diameter (OD). The S-Car-Go are made out of 16ga SS (0.065 wall); so the Inside Diameter (ID) would be for a 1 ¾ header 1.75 – (2 x 0.065 wall) = 1.62” ID
Last edited by David K.; 06-14-2007 at 10:34 AM.
06-13-2007, 11:54 AM
#7
AutoX
Thread Starter
Join Date: Dec 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by David K.
Headers a normal measured from the OD. The S-Car-Go are made out of 16ga SS (0.065 wall).
I am too bad in english, and i don't understand this post
Trending Topics
06-15-2007, 02:16 AM
#8
I got to hear a local car with the Fabspeed long tubes and exhaust (full dual setup) and no cats. It is one of the best sounding 911's I've ever heard: very deep, rich, smooth and powerful. I was able to copy a couple pics from Fabspeed's website, but you really nead to hear a car with it installed.
06-15-2007, 08:39 AM
#9
AutoX
Thread Starter
Join Date: Dec 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 02 Carrera
I got to hear a local car with the Fabspeed long tubes and exhaust (full dual setup) and no cats. It is one of the best sounding 911's I've ever heard: very deep, rich, smooth and powerful. I was able to copy a couple pics from Fabspeed's website, but you really nead to hear a car with it installed.
I know Fabspeed
Maxpeed, S GO Racing, etc ...
But, it's for me more tuning exhaust ...
Their products are very nice, and the sound is beautiful but, the performance are less good
...In fact, the inside diameter is not the best for the 964 3.6 L engine, and the size of the headers is not the better for better torque and HP.
In fact, i am very happy to meat Steve WEINER from Rennsportsystem ... this guy is very very good ...
he know what is better for a 964 and he will make the total exhaust for me
with the good size, as I would like ...
Even, the exhasut will be not so beautiful than a fabspeed, but the performance will be better ...
I hope receive early this complete racing exhaust (headers, mufflers, pipe, U, etc...)
best regards
Arno
10-08-2007, 12:00 PM
#10
Intermediate
Join Date: Nov 2004
Location: Las Vegas, Hell
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
You can get European Racing Headers from Smart Racing Products.
1 1/2"
1 5/8"
1 3/4"
1 7/8"
Take your pick!
1 1/2"
1 5/8"
1 3/4"
1 7/8"
Take your pick!
10-13-2007, 12:10 AM
#11
Instructor
Join Date: Mar 2005
Location: Mundelein, IL
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Here's mine. S Car Go 1-3/4" headers with Daytona prototype mufflers. I had the exhaust custom built by the shop that built my roll cage. Chassis Service in Wadsworth, IL. Not sure where we got the mufflers but if you are interested, I can find out on Monday.
