hardracing

Category: Accessories
Price (no $ sign please): $160
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 996, 997
Location (Region): SouthEast
Item Condition: Brand New

As many of you have read and/or heard about the horrors of ruining your Caliper Bolt holes. It may not have happened yet. But, it's normally just a matter of time.
Here is the solution.

Porsche Motorsports Caliper Stud Kit.

This is what most all the race teams use, and what comes standard on most all Porsche cup cars.
WHY.?
Because, it’s a far superior design to the traditional Caliper Bolt.

All you do is remove your Stock Calipers Bolts, and screw in these Studs into your Wheel Hub.
That’s it. Quick and easy, and OEM Fit.


Advantages:

- No chance of cross threading your Alum. Wheel Carrier with repeated removal of the Steel Caliper Bolt.
- Caliper stays in place when you remove the Nuts and doesn’t fall down.
- Caliper can rest on the stud, while your working on your rotors
- Easier to re-install your calipers with studs guiding the caliper into place (no more hunting for the hole)
- No need to replace Caliper bolts every time you swap your pads (as recommended by Porsche)
- ALL OEM FIT.

Included in the Kit:

(8)Porsche Motorsports Steel Nuts 999.076.083.02

(4) Porsche Motorsports Rear Caliper Studs 999.061.004.02 for both 7.1 and 7.2 cars

(4) Porsche Motorsports Front Caliper Studs 999.061.007.01 for 7.1 ( with OUT PCCB )


Kit Sale Price - $159.95 ... Here is Link to order: .... >> TRACK STUD KIT << =


.

hardracing

.

Here is Link to order: .... >> TRACK STUD KIT << =

.

JPS

Guessing this is just 997?

hardracing

Thinking it crosses over to other models.

Which specific Car are you thinking of puting them on? we can check the PET.

.

JPS

993, thx. Non-turbo.

jhg41977

Same, 993 c4S

hardracing

.

.

.

Your Front Calipers are RADIAL Mount, like the 997. The stock bolts are a little shorter, But should be fine.

Unfortunately, your REAR Caliper bolts are AXIAL Mount. So they are 1/2 the length. no kit for the rear.

Send us PM if your interested.

.

JPS

So are you certain they will fit the 993 front? Suitable for track duty?

hardracing

.

Yea.

vr4henry

Fit 996 GT2?

JPS

So do you have a link for a kit that is only for the 2 fronts for a 993, rather than the whole kit where the rears won't work?

hardracing

.

Unfortunately, we just sold out.

They are currently on Back Order.

.