FABSPEED MOTORSPORT Open House October 2016 Review
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
FABSPEED MOTORSPORT Open House October 2016 Review
Hello Everyone!
Some of you may know we host an Open House in the beginning and end of the driving season every year. Here is a review from our website Blog of this month's event
-John Gaydos
The threat of rain on our Open House events seems to be a tradition - this year was no exception - but the weather held out and we enjoyed a nice, cool day chatting with customers and friends old and new. We opened up our 26,000sqft manufacturing facility and showroom in Fort Washington, PA to all for tech talks, brick oven pizza, live dyno demonstrations, and overall a great time.
Front and center - our project MP4-12C commanded a lot of attention.
We had our Novitec N-Largo wide body California T project on hand in all its glory. It's one of two in the world!
We treated guests to the sinister sounds of a 458 equipped with our Sport Headers and Sport Catalytic Converters on the Fabspeed Dynojet.
The Pizza Wagon fed our guests with their mobile brick oven pizza mobile. Well over a hundred pizzas were made and quickly devoured.
This mean looking R8 V10 is hiding a very potent supercharger, beware.
A familiar face in our shop for development - this 991 GT3 is currently equipped with our Race Headers and Valved Side Muffler Bypass Pipes.
Matt - founder of MC Designs gave a live vinyl wrapping demonstration on this full Fabspeed Performance Package equipped 991 Turbo - we're big on enhancing looks just as much as power and sound.
This show stopper showed up - a Fabspeed equipped Aventador.
BMW's of all makes and models were present in force.
We led a few cars from a local Cars and Coffee directly to our Open House - these Porsches had a nice cruise in.
Our Porsche Specialist John Gaydos had his Cayman R in the midst of the fun.
Our development car for our M2 exhaust suite - check out our brushed single wall stainless tips that finish off our Muffer Bypass Exhaust.
Educating guests on the many components we offer for the 987.2 - this is our own 2011 Spyder we used for development.
There were plenty of pups present
We look forward to opening our doors and shop floors to all again in 2017! However, feel free to reach out to me any time for a personal tour
Some of you may know we host an Open House in the beginning and end of the driving season every year. Here is a review from our website Blog of this month's event
-John Gaydos
The threat of rain on our Open House events seems to be a tradition - this year was no exception - but the weather held out and we enjoyed a nice, cool day chatting with customers and friends old and new. We opened up our 26,000sqft manufacturing facility and showroom in Fort Washington, PA to all for tech talks, brick oven pizza, live dyno demonstrations, and overall a great time.
Front and center - our project MP4-12C commanded a lot of attention.
We had our Novitec N-Largo wide body California T project on hand in all its glory. It's one of two in the world!
We treated guests to the sinister sounds of a 458 equipped with our Sport Headers and Sport Catalytic Converters on the Fabspeed Dynojet.
The Pizza Wagon fed our guests with their mobile brick oven pizza mobile. Well over a hundred pizzas were made and quickly devoured.
This mean looking R8 V10 is hiding a very potent supercharger, beware.
A familiar face in our shop for development - this 991 GT3 is currently equipped with our Race Headers and Valved Side Muffler Bypass Pipes.
Matt - founder of MC Designs gave a live vinyl wrapping demonstration on this full Fabspeed Performance Package equipped 991 Turbo - we're big on enhancing looks just as much as power and sound.
This show stopper showed up - a Fabspeed equipped Aventador.
BMW's of all makes and models were present in force.
We led a few cars from a local Cars and Coffee directly to our Open House - these Porsches had a nice cruise in.
Our Porsche Specialist John Gaydos had his Cayman R in the midst of the fun.
Our development car for our M2 exhaust suite - check out our brushed single wall stainless tips that finish off our Muffer Bypass Exhaust.
Educating guests on the many components we offer for the 987.2 - this is our own 2011 Spyder we used for development.
There were plenty of pups present
We look forward to opening our doors and shop floors to all again in 2017! However, feel free to reach out to me any time for a personal tour
__________________
Porsche Performance Specialist
John@Fabspeed.com
215-618-9796
Fabspeed Motorsport USA
155 Commerce Drive Fort Washington, PA 19034
www.Fabspeed.com
Porsche Performance Specialist
John@Fabspeed.com
215-618-9796
Fabspeed Motorsport USA
155 Commerce Drive Fort Washington, PA 19034
www.Fabspeed.com
#3
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
The track most especially! I might be heading to NJMP or Dominion Raceway next month. Any other track days planned for you this year? Glad you are loving the headers as much as I do!
#6
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
I see you are from the Philly area, come stop by sometime
Absolutely, shoot me over a PM and let me know when a good day/time works for you