AIM TPS on Porsche 968
10-03-2015, 08:56 PM
#2
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 18,649
Received 2,799 Likes
on
1,654 Posts
Did you determine you couldn't get it from an ECU pin?
__________________
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
Trying to see how others have mounted them.
10-04-2015, 12:19 PM
#5
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 18,649
Received 2,799 Likes
on
1,654 Posts
I would imagine a string pot on the throttle bellcrank in the engine compartment would be best. Here is a pic of one on a Miata...
10-05-2015, 01:34 PM
#7
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 18,649
Received 2,799 Likes
on
1,654 Posts
I think you could fab a bracket that is attached at the cable housing end on top and run the string pot around the pulley to the same attachment point as the throttle cable.
http://flussigmagazine.com/uploads/3...67132_orig.jpg
http://flussigmagazine.com/uploads/3...67132_orig.jpg
Trending Topics
04-29-2016, 12:58 PM
#8
Rennlist Member
Thread Starter
Reviving an old thread. Still looking for a tutorial on installing my AIM TPS sensor on a 968. Finally got the brake pressure, RPM, etc working well. Now just need to figure out how to mount the TPS. Has anyone done this that could send me a picture of the bracket you fabricated? Thanks.
04-29-2016, 01:02 PM
#9
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 18,649
Received 2,799 Likes
on
1,654 Posts
04-29-2016, 01:09 PM
#10
Rennlist Member
Thread Starter
Originally Posted by ProCoach
05-03-2016, 11:07 PM
#11
Reviving an old thread. Still looking for a tutorial on installing my AIM TPS sensor on a 968. Finally got the brake pressure, RPM, etc working well. Now just need to figure out how to mount the TPS. Has anyone done this that could send me a picture of the bracket you fabricated? Thanks.
