TheRocks DIYs Posted on 6SpeedOnline
#34
Rennlist Member
Hi There....
I just posted a number of DIY's on 6Speed as indicated, so I thought I would put the links here in case it may benefit some of you.
Here is what I posted:
TheRock's 997.1 TT Silicon Intake Duct DIY Guide
TheRock's 997.1 TT Spark Plug / Coils DIY Guide - Updated
TheRock's 997.1 TT to GT2RS / 997.2 Intercooler DIY Guide
TheRock's Pressure Tester & Intercooler Test DIY Guide
TheRock's 997 TT Steering Wheel Upgrade DIY Guide
TheRock's 997 TT Mesh Grills and Radiator Cleaning DIY
TheRock's 997 Rear Bumper Cover Removal DIY Guide
TheRock's USB POWER PORT Conversion DIY Guide
TheRock's GT3 "Smile" Grill Install DIY Guide
Enjoy,
DC
I just posted a number of DIY's on 6Speed as indicated, so I thought I would put the links here in case it may benefit some of you.
Here is what I posted:
TheRock's 997.1 TT Silicon Intake Duct DIY Guide
TheRock's 997.1 TT Spark Plug / Coils DIY Guide - Updated
TheRock's 997.1 TT to GT2RS / 997.2 Intercooler DIY Guide
TheRock's Pressure Tester & Intercooler Test DIY Guide
TheRock's 997 TT Steering Wheel Upgrade DIY Guide
TheRock's 997 TT Mesh Grills and Radiator Cleaning DIY
TheRock's 997 Rear Bumper Cover Removal DIY Guide
TheRock's USB POWER PORT Conversion DIY Guide
TheRock's GT3 "Smile" Grill Install DIY Guide
Enjoy,
DC
#39
Pro
Thread Starter
#40
Racer
#41
Rennlist Member
Just wanted to say thanks for the guide on the coils and plugs.
I just did these and got the latest versions of coil from porsche.
they new setup at this time was 5 of the newer larger coils and 1 of the old style.
the old style was installed on number 6 (pass front) to clear the vgt actuator.
also had to space out the heatshield on that side to clear.
drivers side was fine on all.
also didnt lower motor at all just removed intercoolers, and heat shields.
Cheers
I just did these and got the latest versions of coil from porsche.
they new setup at this time was 5 of the newer larger coils and 1 of the old style.
the old style was installed on number 6 (pass front) to clear the vgt actuator.
also had to space out the heatshield on that side to clear.
drivers side was fine on all.
also didnt lower motor at all just removed intercoolers, and heat shields.
Cheers
#42
Racer
First of all, you're local. If you haven't done so yet, join our NorCal 997 group on facebook!
www.facebook.com/groups/NorCal997Turbo
Second of all, you're license plate frame is amazing! lol
www.facebook.com/groups/NorCal997Turbo
Second of all, you're license plate frame is amazing! lol
#44
Rennlist Member
Just wanted to pass my thanks on to TheRock for his fantastic DIY guides. I installed my GT2RS intercoolers over the weekend and his DIY write up with photos was a huge assistance. Very glad we have members like this out in the community to document these jobs and write up the DIY instructions. Cheers