Good Place to bed in pads around Los Angeles?
#1
Instructor
Thread Starter
Good Place to bed in pads around Los Angeles?
Anyone know of a good place where I can bed in a new set of brake pads around Los Angeles
At night works the best for me, and I imagine it's hard to find a place quiet enough on a weekend.
Obviously I'd like to not attract the attention of any LEO's
I don't mind driving too much to get there.
At night works the best for me, and I imagine it's hard to find a place quiet enough on a weekend.
Obviously I'd like to not attract the attention of any LEO's
I don't mind driving too much to get there.
#2
Rennlist Member
It's a trap!
#3
Rennlist Member
That section of vista del mar next to LAX has light traffic. Also on the weekends the streets south of LAX near the chevron refinery and all the aerospace firms is really quiet.
I do mine near the Boeing facility in Huntington Beach, Seal Beach. Won't tell the roads :-) lol. LONG STRAIGHT and can do it in 2 passes.
I do mine near the Boeing facility in Huntington Beach, Seal Beach. Won't tell the roads :-) lol. LONG STRAIGHT and can do it in 2 passes.
#5
Instructor
Thread Starter
PCCB bedding in
Well - it looks like Porsche recs for bedding in the brakes are multiple stops from 100 MPH to 50 MPH.
I don't think that stops from 60 are going to be nearly hot enough to do it properly
https://www.total911.com/how-to-bed-...eramic-brakes/
I don't think that stops from 60 are going to be nearly hot enough to do it properly
https://www.total911.com/how-to-bed-...eramic-brakes/
#7
Racer
BS. You don't need to go 100mph. Over 25 years experience with it hasn't failed to be sufficient- run 60 mph- brake hard (threshold braking) to a stop. Accelerate to 60mph and brake hard again. Repeat 8-10 times. Allow brakes to cool and then you're good to go
Trending Topics
#8
Rennlist Member
Join Date: Jun 2013
Location: Orange County
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
This. Brake rotors are flaming after 8-10 60-10 threshold brakes. More than enough.