Schnell 911

Hey all, installing new racing seats and a bunch of birthday goodies in the PCAR. Any one of you know what the torque spec is for the seat sliders? These would be the four (4) bolts - each side that were removed when I pulled the factory seats out, thank you.

Macster

FWIW and probably not much the M10 x 28 Torx bolts that hold the 996 Turbo seat rails get torqued to 65nM (48 ft lbs). There are 2 of these bolts in the front and 2 in the rear.

OKB

unless its specified you always go by the bolt size for torque, especially common body bolts, look up a torque spec list

ltcjmramos

According to Raby's "Fastening Specifications" book 37 ft-lb, M10-26.