Notices
997 Forum 2005-2012
Sponsored by:
Sponsored by:

997 DIY and Tech Index

Thread Tools
 
Search this Thread
 
Old 10-07-2016, 11:14 PM
  #61  
patriot993
Rennlist Member
 
patriot993's Avatar
 
Join Date: Oct 2007
Location: Indiana
Posts: 588
Received 75 Likes on 51 Posts
Default

Proper Side Marker Replacement

This is from JCD911S

Originally Posted by JCD911S
If the side marker has been removed incorrectly, it'll cause the clip to get mis-shaped. Some DIY's say to just pry it out, but the correct way is to slide the marker back (to compress the spring clip and to provide clearance for the front tab to clear the locking notch), then lift up the tabbed end out of the bumper.
The following users liked this post:
BLU997 (07-18-2020)
Old 12-23-2016, 01:55 PM
  #62  
ltcjmramos
Addict
Rennlist Member
 
ltcjmramos's Avatar
 
Join Date: May 2004
Location: Half Moon Bay, CA
Posts: 4,466
Received 142 Likes on 90 Posts
Default

Install of Fabspeed Competition Air Intake
http://www.fabspeed.com/templates/__...r%20Intake.pdf
Old 06-03-2017, 11:56 AM
  #63  
AmericanPupusa
Advanced
 
AmericanPupusa's Avatar
 
Join Date: Nov 2015
Posts: 75
Received 6 Likes on 3 Posts
Default

Door Lock Mechanism Replacement for when microswitch goes bad not allowing window to stay down when door is open. Door panel removal for other projects. I had to do this when my window wouldn't stay down when I opened the door.
Old 08-10-2017, 03:05 AM
  #64  
TheBruce
Three Wheelin'
 
TheBruce's Avatar
 
Join Date: Feb 2017
Location: San Francisco
Posts: 1,746
Received 444 Likes on 161 Posts
Default

A detailed guide to installing lowering springs, struts and coilovers:

https://rennlist.com/forums/997-foru...r-997-1-a.html
The following users liked this post:
911URGE (08-24-2020)
Old 09-21-2017, 05:04 PM
  #65  
STEVEW3765
Advanced
 
STEVEW3765's Avatar
 
Join Date: Feb 2015
Location: Tulsa, Ok
Posts: 77
Likes: 0
Received 0 Likes on 0 Posts
Default

My prayers have been answered. Thanks a million...
Old 04-03-2018, 03:02 PM
  #66  
larrysb
Racer
 
larrysb's Avatar
 
Join Date: May 2009
Location: Silicon Valley
Posts: 303
Received 59 Likes on 39 Posts
Default

How to replace cupholder assembly.

https://rennlist.com/forums/997-foru...-diy-easy.html
Old 11-12-2018, 11:34 AM
  #67  
TheBruce
Three Wheelin'
 
TheBruce's Avatar
 
Join Date: Feb 2017
Location: San Francisco
Posts: 1,746
Received 444 Likes on 161 Posts
Default

A few more:

The Quick Guide to Replacing Your 997 Rear Strut Mount
The DIY Guide to Replacing your 997 Coolant Expansion Tank
How to replace your starter/alternator cable to cure slow starts on the 997.1
997 Center Console Respray: DIY Instructions For Amazing Results
The following users liked this post:
911URGE (08-25-2020)
Old 05-08-2019, 07:50 PM
  #68  
scadams
Rennlist Member
 
scadams's Avatar
 
Join Date: Apr 2019
Location: SATX
Posts: 411
Received 267 Likes on 120 Posts
Default

997.2 Base and S 2/4/GTS/Targa/Cab Bulb Guide
Old 11-25-2019, 02:50 PM
  #69  
Vincent713
Three Wheelin'
 
Vincent713's Avatar
 
Join Date: May 2017
Posts: 1,453
Received 162 Likes on 117 Posts
Default

Do any of you guys know a link to replacing the key ignition switch? I tried looking and searching on this thread but I might have missed it?
Old 04-14-2020, 10:23 PM
  #70  
Bruce In Philly
RL Community Team
Rennlist Member
 
Bruce In Philly's Avatar
 
Join Date: Dec 2012
Location: Philadelphia
Posts: 5,981
Likes: 0
Received 1,417 Likes on 859 Posts
Default 997.2 Power Steering Pump Replacement

997.2 Power Steering Pump Replacement

Verboden's DIY:
https://rennlist.com/forums/diy-subm...and-r-diy.html

My DIY for my 2009 C2S:

https://rennlist.com/forums/997-foru...ement-diy.html

Peace
Bruce in Philly

Last edited by Bruce In Philly; 04-19-2020 at 09:42 PM.
Old 04-22-2020, 03:00 PM
  #71  
yvesvidal
Pro
 
yvesvidal's Avatar
 
Join Date: Jan 2011
Location: RALEIGH, NC
Posts: 692
Received 119 Likes on 69 Posts
Default

Lots of DIY articles, that I had to perform on my 997.1 2006 C4S:

http://murenae.com/cars-porsche-2/

Have fun.
Yves
The following users liked this post:
Ripking (07-09-2020)
Old 06-01-2020, 07:23 PM
  #72  
Dirty Red
1st Gear
 
Dirty Red's Avatar
 
Join Date: Apr 2020
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Waht is this part called?


what is this part called?
Old 06-01-2020, 07:33 PM
  #73  
AmericanPupusa
Advanced
 
AmericanPupusa's Avatar
 
Join Date: Nov 2015
Posts: 75
Received 6 Likes on 3 Posts
Default

Originally Posted by Dirty Red

what is this part called?
Oddly enough, mine fell out today. Trim piece for wind deflector

There is a left and a right piece. This is for the driver’s side I believe.

https://www.pelicanparts.com/More_In...=0&SVSVSI=997M
Old 08-06-2020, 10:40 PM
  #74  
Bruce In Philly
RL Community Team
Rennlist Member
 
Bruce In Philly's Avatar
 
Join Date: Dec 2012
Location: Philadelphia
Posts: 5,981
Likes: 0
Received 1,417 Likes on 859 Posts
Default

PCM 3.0 hard drive replacement with SSD

https://rennlist.com/forums/997-foru...tructions.html

Peace
Bruce in Philly
Old 08-22-2020, 06:18 PM
  #75  
Bruce In Philly
RL Community Team
Rennlist Member
 
Bruce In Philly's Avatar
 
Join Date: Dec 2012
Location: Philadelphia
Posts: 5,981
Likes: 0
Received 1,417 Likes on 859 Posts
Default

997.2 9A1 Coolant Flush Drain Replacement

https://rennlist.com/forums/997-foru...2-9a1-diy.html

Peace
Bruce in Philly


Quick Reply: 997 DIY and Tech Index



All times are GMT -3. The time now is 10:55 PM.