Spotless Water Deionization System Promotion
#16
How many washes, roughly, before the first "light" spots show up? Assuming SoCal water, deionizer used during final rinse only. And black car!
#18
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
It's all a function of how many ppm you have going into the cr. In general, socal water is around 400 ppm, and with that reading, you'll get about 200 gallons of di water. How much you'll use is up to you. I'd recommend using the cr with a pressure washer. This way you can use the cr all the way, use 1/3 amount of water than you would use if a garden hose is used, and also triple the life of the resin. Hope this helps.
__________________
Specializing in Porsche/Ferrari since 1995
Why choose GP...WATCH OUR DOCUMENTARY
Follow Moe HERE
GP Fastrak - Ceramic/PPF/Tint in one simple bundle - Click Here for more info
Specializing in Porsche/Ferrari since 1995
Why choose GP...WATCH OUR DOCUMENTARY
Follow Moe HERE
GP Fastrak - Ceramic/PPF/Tint in one simple bundle - Click Here for more info
#19
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
http://www.glisteningperfectionstore...Core%2C/Detail
#20
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
#21
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
#22
I ordered the Package 1 and added the bulk resin linked elsewhere in the thread. I took the resin out of the cart and it was no charge for shipping--I don't suppose there is some way to add the resin to the order without incurring shipping charges?
#23
Rennlist Member
Join Date: Feb 2006
Location: Larkspur, CO
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
In addition I purchased the Airmax filtered blow dryer from Moe last Summer and it is the perfect complement to the CR Spotless system. While I will use it year round, in this part of the country where we get a real winter and the weather turns cold in September I want to wash the car and pull it into the garage to dry it. The Airmax is an exceptional product for rapidly, thoroughly and safely drying your vehicles. I was absolutely stunned how quickly I dried every nook and crevice of the cars. Rocker panels, hinges, light housing, mirrors, trim, license plate frames, under hood, engine bay, trunk lids, etc. Air drying would take hours if not days in cooler temps. A terrific product that I would not have known about without Glistening Perfections expertise and knowledge.
Like the CR Spotless System, once you use it you will wonder how you ever got along without it. Highly recommended and no affiliations to any of the parties mentioned; just a very satisfied customer
#24
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
http://www.glisteningperfectionstore...acement/Detail
It's the same amount as the bulk, but on special, and it's bagged so the resin stays fresh longer.
#25
Try this link...it's got free shipping:
http://www.glisteningperfectionstore...acement/Detail
It's the same amount as the bulk, but on special, and it's bagged so the resin stays fresh longer.
http://www.glisteningperfectionstore...acement/Detail
It's the same amount as the bulk, but on special, and it's bagged so the resin stays fresh longer.
#26
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
#27
Rennlist Member
Hi Moe,....
Well I worked hard this weekend and am surfing the couch today.
Package #2 sold American!
I look forward to trying it out once the outside temp comes up a bit.
Well I worked hard this weekend and am surfing the couch today.
Package #2 sold American!
I look forward to trying it out once the outside temp comes up a bit.