Cleaning scuff marks on clear plastic wheel well guards?
#1
Cleaning scuff marks on clear plastic wheel well guards?
Just noticed a scuff mark of some kind on the driver's side wheel well. looks like something hit it and left a pretty good sized mark. It looks almost like a cone mark but not orange.
Has anyone had any experience buffing out marks on these? I guess the worst case scenario is to remove it and replace with another piece of plastic, but I would prefer to buff it out if possible. Thoughts?
Has anyone had any experience buffing out marks on these? I guess the worst case scenario is to remove it and replace with another piece of plastic, but I would prefer to buff it out if possible. Thoughts?
#2
In marine supply stores (and elsewhere I guess) they have plastic cleaner and polish. This stuff is ostensibly used for polishing scratches out of the the thin clear VINYL plastic windows on dodgers (canvas) on boats. It's my best bet to eliminate small scratches in the vinyl wheel well guards.
Then again, unless the scuff is really big and ugly, who cares? It's a car dammit!! Doodoo happens.
Then again, unless the scuff is really big and ugly, who cares? It's a car dammit!! Doodoo happens.
#3
"Then again, unless the scuff is really big and ugly, who cares? It's a car dammit!! Doodoo happens."
Yeah, agreed. My first thought was "oh, looks like the plastic is doing its job"
Yeah, agreed. My first thought was "oh, looks like the plastic is doing its job"
#4
Banned
If it left a permanent deformation on the plastic, not much you can do about that except to replace it if it bothers you. But if it's just a scuff mark you can easily buff it out using ordinary cleaner/wax. I use Meguiar's Cleaner/Wax for general purposes like this. You don't need a specialized plastic cleaner/polish for the plastic inside the wheel well. These are best saved for delicate plastic pieces which don't require an aggressive (read abrasive) cleaner. It may take you forever to remove the scuff with these products. You might also try a polishing compound (one step finer than rubbing compound) if the cleaner/wax is not working for you. If so, you might want to "blend" the adjacent area so that you're not left with one very shiny spot!
#5
Originally Posted by sactogreg
"Then again, unless the scuff is really big and ugly, who cares? It's a car dammit!! Doodoo happens."
Yeah, agreed. My first thought was "oh, looks like the plastic is doing its job"
Yeah, agreed. My first thought was "oh, looks like the plastic is doing its job"
#6
Burning Brakes
Originally Posted by OCBen
If it left a permanent deformation on the plastic, not much you can do about that except to replace it if it bothers you. But if it's just a scuff mark you can easily buff it out using ordinary cleaner/wax. I use Meguiar's Cleaner/Wax for general purposes like this. You don't need a specialized plastic cleaner/polish for the plastic inside the wheel well. These are best saved for delicate plastic pieces which don't require an aggressive (read abrasive) cleaner. It may take you forever to remove the scuff with these products. You might also try a polishing compound (one step finer than rubbing compound) if the cleaner/wax is not working for you. If so, you might want to "blend" the adjacent area so that you're not left with one very shiny spot!