02 Blue C2

Hi Loren,
I have seen a couple of your previous posts where you call out part numbers for the ROW M030 suspension. Can you confirm these part numbers apply to the 996 C2 across all years or have they been changed for later models. A couple of questions about on the subject:

1)My C2 is a 2002 model and I am about to order the set up and want to make sure I am getting the correct parts.

2) The shop that will be installing had a concern that the parts list and I quote :
" On your parts listing I don't see any upper mount for the shocks in the
front or rear. There is a compensation ring that helps to set ride height in
the front and rear top mount. In the front the ring is either 3.0mm or 6.5mm
and in the rear the ring is either 0.5mm or 4.0mm. The ring used is
determined by the spring used and the paint code on the spring. I am trying
to determine if the rings you have on your stock suspension can be reused
with the Euro M030 setup". Loren can you shed some light on this?

Thanks,

Gary
Myersville, MD
18" Turbo Look Wheels
Pirelli PZero N4
PSE (no switch)
Twin Exhaust Tips

Viken

Why not just order the kit from an experienced and reputable vendor? A Rennlist sponsor too.

02 Blue C2

Viken,
Carnwell will be the vendor of choice

I was just trying to understand what parts were called out for the MY02 C2 in order to verify the supplied kit was all inclusive and ready for the porsche shop to install.

Thanks,
Gary