Single DIN PCCM
#1
Single DIN PCCM
Hi all!
New to the forum and ownership, thanks!
I would like to install the single DIN PCCM (non-plus) in my 02 C4 cab. Call me weird, but I kinda like the cute little screen, don't care about navi, and I want to avoid having to move the HVAC controls. I know there was an infamous red 996 on BAT from MI that had pics of it, has anyone else done it? If so is it pretty straight forward?
Thanks!
Chris
New to the forum and ownership, thanks!
I would like to install the single DIN PCCM (non-plus) in my 02 C4 cab. Call me weird, but I kinda like the cute little screen, don't care about navi, and I want to avoid having to move the HVAC controls. I know there was an infamous red 996 on BAT from MI that had pics of it, has anyone else done it? If so is it pretty straight forward?
Thanks!
Chris
#3
Nordschleife Master
Thankfully, you have an analog system; otherwise, it won't work since the single DIN classic radio doesn't support MOST transfer bus. If your car has the frunk amplifier, then you might need the special OE adapter/harness. All OEM radios send line level output via the YELLOW plug from the becker radios. Good luck!
#4
Rennlist Member
Good luck, OP. You're going to love it.
#5
Thankfully, you have an analog system; otherwise, it won't work since the single DIN classic radio doesn't support MOST transfer bus. If your car has the frunk amplifier, then you might need the special OE adapter/harness. All OEM radios send line level output via the YELLOW plug from the becker radios. Good luck!
Thank you!
#6
Nordschleife Master
#7
I am getting a hum, I think this will fix
Trending Topics
#9
The following 2 users liked this post by eckcn17:
fazm (02-24-2024),
ZuffenZeus (02-24-2024)
#11
#13
#14
thanks all for the help!
Chris
The following users liked this post:
plpete84 (03-01-2024)
#15
Rennlist Member
please link your harness/part - thanks!
And post more pics, dang it!
And post more pics, dang it!