BBS LM proper fitment
#1
Advanced
Thread Starter
Join Date: Aug 2013
Location: Montreal, QC
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
BBS LM proper fitment
Hi guys,
I saw a nice set of BBS LMs in the classifieds forum, but I don't know much about wheel fitment. I looked at various posts, but can't seem to get a definitive answer on the correct specs for fitting LMs on the 993tt...There's also this thing about "reverse mounting" them?
Thanks for your help!
I saw a nice set of BBS LMs in the classifieds forum, but I don't know much about wheel fitment. I looked at various posts, but can't seem to get a definitive answer on the correct specs for fitting LMs on the 993tt...There's also this thing about "reverse mounting" them?
Thanks for your help!
#2
Drifting
Those are the correct specs to fit a wb/tt, however it most likely will require a rear spacer to fit nicely.
Reverse mounting will eliminate the need for a rear spacer, however depending on your suspension setup and ride height it may or may not be too aggressive.
Excellent thread to understand reverse mounting, essentially it will reduce your offset by 14mm:
https://rennlist.com/forums/993-foru...e-centers.html
Reverse mounting will eliminate the need for a rear spacer, however depending on your suspension setup and ride height it may or may not be too aggressive.
Excellent thread to understand reverse mounting, essentially it will reduce your offset by 14mm:
https://rennlist.com/forums/993-foru...e-centers.html