lowering??????
#1
Three Wheelin'
Thread Starter
lowering??????
hey guys, whats the best way o lower a 993tt just for looks and ride. i do not track my car and never will, just looking to lower a little bit to enhance its stance
thanks
thanks
#4
Rennlist Member
Go with Bilstein HD B6 struts and factory RS plates and you'll be happy for half the price of only the PSS10 minus the Rennline camber plates.
With PSS10 you'll need the GT2/RSR upright and tie rods to make the PSS10 set-up worth while unless you want to be all over the road with bump steer.
With PSS10 you'll need the GT2/RSR upright and tie rods to make the PSS10 set-up worth while unless you want to be all over the road with bump steer.
#5
Rennlist Member
Join Date: Nov 2010
Location: Central California
Posts: 3,484
Likes: 0
Received 12 Likes
on
11 Posts
Unless you're going lower than euro RS height, you shouldn't really need the gt2 uprights. If you're no where near being that low, you may induce bump steer using the gt2 uprights.
Trending Topics
#8
Drifting