Wiring
#1
Advanced
Thread Starter
Wiring
I am "cleaning up" the plug installation on my 95 and when I put the plugs back in I reused the same plug wires, but something kept bothering me.
I took a hard look at the Plug location, wiring designation, and the distributor. This is what I found.
The lower bank and upper banks on the RHS where sent to the opposing distributors. 1.e #4 ll plug went to the #4 l distributor same with 5 & 6. This was on the RHS only.
Anybody ever seen or heard of this before.
I realize that both plugs in each cylinder should fir off together or at the same time, but I would question the practice just does not seem right.
Mike Smith
Windermere, FL
95 / 993 / Cab / Trip
I took a hard look at the Plug location, wiring designation, and the distributor. This is what I found.
The lower bank and upper banks on the RHS where sent to the opposing distributors. 1.e #4 ll plug went to the #4 l distributor same with 5 & 6. This was on the RHS only.
Anybody ever seen or heard of this before.
I realize that both plugs in each cylinder should fir off together or at the same time, but I would question the practice just does not seem right.
Mike Smith
Windermere, FL
95 / 993 / Cab / Trip