Project RSR
08-18-2015, 07:10 AM
#1
Instructor
Thread Starter
Join Date: Jun 2014
Location: Victoria, Australia
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Project RSR
I have always wanted to make 993 RSR Clone so I bit the bullet and went looking for a suitable 993 C2. I was lucky to find one that already had some of the modifications already done. It had the correct front and rear spoilers, a roll cage, KW Clubman shockers and a LSD. My aim is to build a car that is very close to the RSR but it has to be able to be driven on the road so there will be some compromises. The motor will be left at 3.6 litre but it will be modified. Photo's to come
08-18-2015, 10:15 AM
#3
Burning Brakes
Trending Topics
08-18-2015, 08:57 PM
#8
Instructor
Thread Starter
Join Date: Jun 2014
Location: Victoria, Australia
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
<p>This a photo of a brochure that I have kept since 1997. It is the official factory photo that appears all over the Internet. I have always liked the look of this car so I am making a clone of it.</p>
Last edited by Robb M.; 08-20-2015 at 11:02 AM.
08-19-2015, 04:53 AM
#12
Rennlist Member
Cool Project! 
I have a RSR replica street/track car that have also raced. It is mostly stock but the suspension is tricked out.
Do you already have build ideas? What are you doing with the suspension etc.?
I have a RSR replica street/track car that have also raced. It is mostly stock but the suspension is tricked out.
Do you already have build ideas? What are you doing with the suspension etc.?
08-19-2015, 06:49 AM
#15
Instructor
Thread Starter
Join Date: Jun 2014
Location: Victoria, Australia
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
It is definitely a C2 but it had some work done on the guards to widen them by the previous owner. Also the sills have added on. They are coming off.
