Anyone know this 1995 Red 993 c2 on ebay
#16
Intermediate
Thread Starter
Join Date: Nov 2013
Location: Seattle
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Any input on the "intake" noise I'm hearing?
Ahh I see thanks guess they changed that. But most likely brake and oil. Can't think of much other fluids.
Pics will come once I get the car to a detail shop. But will do a wash myself and get the 800 miles worth of bugs off the car. Maybe some prelim pics. I want the swirls out.
Ahh I see thanks guess they changed that. But most likely brake and oil. Can't think of much other fluids.
Pics will come once I get the car to a detail shop. But will do a wash myself and get the 800 miles worth of bugs off the car. Maybe some prelim pics. I want the swirls out.
#17
Intermediate
Thread Starter
Join Date: Nov 2013
Location: Seattle
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Photos, car has not been detailed but has gotten to my friend to do some pictures!
https://www.flickr.com/gp/134968860@N02/422t11
https://www.flickr.com/gp/134968860@N02/422t11
#18
RL Community Team
Rennlist Member
Rennlist Member
I really like this car.
#19
Seared
Rennlist Member
Rennlist Member
Andreas
#22
#23
Drifting
Anyone know this 1995 Red 993 c2 on ebay
Really? I swear I read somewhere only certain bolts and washers could be replaced on the chain covers without dropping the engine, and not the whole cover kit.
#24
#25
Drifting
Anyone know this 1995 Red 993 c2 on ebay
Andreas, thanks for the additional info. Good to know it can be done without dropping the engine out of the car entirely. Since I likely won't be DIYing this one, I suspect my mechanic would just insist on dropping the whole engine. I'm not rushing into this repair anyhow and will likely wait for until it's time for a top end and/or clutch job.
#26
Intermediate
Thread Starter
Join Date: Nov 2013
Location: Seattle
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know this 1995 Red 993 c2 on ebay
Sorry for not replying and etc but this app sucks. Need to get on a computer to reply. But I did bring the car in for service and should be picking the car up later today.
In for oil change, possibly brake fluid, tranny fluid, look over the car, and the "noise" I'm hearing is only at 4-5k rpm with the ac on. With the ac off no noise. My shop mechanic was stumped by it and said he would look into it.
Thank you guys/gals? for the comments . Maybe more pics to come once I get everything sorted. IMO minor things besides that damn noise.
In for oil change, possibly brake fluid, tranny fluid, look over the car, and the "noise" I'm hearing is only at 4-5k rpm with the ac on. With the ac off no noise. My shop mechanic was stumped by it and said he would look into it.
Thank you guys/gals? for the comments . Maybe more pics to come once I get everything sorted. IMO minor things besides that damn noise.
#27
Drifting
I do notice a difference in cabin noise/sound when using the AC. I've just presumed it was sound resonating through the AC piping that changes the pitch/tone of engine noise coming into the cabin.
GL sorting out these minor nits!
GL sorting out these minor nits!
#28
Intermediate
Thread Starter
Join Date: Nov 2013
Location: Seattle
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know this 1995 Red 993 c2 on ebay
Yea I noticed small noises but the noise I'm concerned about is a deeper noise coming from the rear left. Went on a drive with my mechanic and he was stumped. He said he's never heard that noise before. He has an 98 c2s himself and there's about three different 993s in the two recent times I was at his shop. I think I can cross off it being engine and tranny since only happens with the ac on for some reason.
I'll see today what's the damage. Thanks should be fine. Need to put a jack pad back on too...
I'll see today what's the damage. Thanks should be fine. Need to put a jack pad back on too...
#30
Seared
Rennlist Member
Rennlist Member