Notices
993 Forum 1995-1998

Where do these vacuum lines go?? Varioram engine

Thread Tools
 
Search this Thread
 
Old 11-29-2014, 04:31 PM
  #1  
benjr
Advanced
Thread Starter
 
benjr's Avatar
 
Join Date: Apr 2004
Location: San Marcos CA
Posts: 88
Likes: 0
Received 0 Likes on 0 Posts
Default Where do these vacuum lines go?? Varioram engine

Where do the other ends of the vacuum lines in the two pictures connect to? I'm referring to the line connecting to the bottom of resonator on air duct and next pic the bottom of the resonator by the air pump rear right side. I have looked at the 993 vacuum diagram for the resonators and vacuum units but can't seem to find these. Im all ready to put my intake back on but Im stumped. One of the pieces of tape I marked the lines with disappeared. Most pics I have found do not picture a variorum intake.

Also the 3rd picture shows a line I found under the wiring harness laying from left to right side on engine. I think one side of this line goes to the resonator behind the air pump on the right side but I dont have any open spots on the left side to connect them to. Based on looking at the other lines and the diagrams it seems the side outputs of the resonators feed the vacuum diaphragm units and the bottom of the resonator feeds to the vacuum supply y fittings. Any help is appreciated.
Attached Images    
Old 11-29-2014, 05:33 PM
  #2  
RichPugh
Burning Brakes
 
RichPugh's Avatar
 
Join Date: Apr 2013
Location: Baltimore, MD
Posts: 1,029
Received 8 Likes on 8 Posts
Default



Old 11-29-2014, 07:18 PM
  #3  
PRSWILL
Rennlist Member
 
PRSWILL's Avatar
 
Join Date: Nov 2013
Location: Minneapolis
Posts: 2,448
Received 439 Likes on 291 Posts
Default

^^^ AWESOME^^^
Old 11-30-2014, 01:41 AM
  #4  
benjr
Advanced
Thread Starter
 
benjr's Avatar
 
Join Date: Apr 2004
Location: San Marcos CA
Posts: 88
Likes: 0
Received 0 Likes on 0 Posts
Default

i have those diagrams, finally figured it out just had to figure out what a couple of things were in the diagram vs real life.
Old 11-30-2014, 12:19 PM
  #5  
RichPugh
Burning Brakes
 
RichPugh's Avatar
 
Join Date: Apr 2013
Location: Baltimore, MD
Posts: 1,029
Received 8 Likes on 8 Posts
Default

I will be in the same boat in a few days... re-installing my varioram, lol.
Old 07-06-2022, 12:13 AM
  #6  
ocmacman
Rennlist Member
 
ocmacman's Avatar
 
Join Date: Aug 2014
Location: Southern California Orange County
Posts: 1,004
Received 54 Likes on 35 Posts
Default

Originally Posted by RichPugh


Ok, this diagram has been floating around for a while, How the hell do you read it? I went to engineering school and can't make heads of where these darn vacum lines to. Maybe if someone could explain the purpose that may help or a color diagram
The following users liked this post:
Twilightblue28A (07-06-2022)
Old 07-06-2022, 02:07 AM
  #7  
EckFe1
Pro
 
EckFe1's Avatar
 
Join Date: Dec 2007
Location: was: CA, 956XX now: Bavaria 910XX
Posts: 556
Likes: 0
Received 33 Likes on 22 Posts
Default

I used PET, the last time I worked on the vacuum lines.
Old 07-06-2022, 11:58 AM
  #8  
Bill Verburg
Addict
Rennlist Member

 
Bill Verburg's Avatar
 
Join Date: May 2001
Posts: 12,254
Received 512 Likes on 352 Posts
Default

Maybe this will help





The following 2 users liked this post by Bill Verburg:
fnckr (07-06-2022), ocmacman (07-13-2022)



Quick Reply: Where do these vacuum lines go?? Varioram engine



All times are GMT -3. The time now is 01:38 AM.