Notices
993 Forum 1995-1998

Heater Hose Part Number

Thread Tools
 
Search this Thread
 
Old 07-29-2014, 01:43 PM
  #1  
BSL
Three Wheelin'
Thread Starter
 
BSL's Avatar
 
Join Date: Feb 2007
Location: Wayne, PA
Posts: 1,487
Likes: 0
Received 0 Likes on 0 Posts
Default Heater Hose Part Number

When swapping out a heater mix flap in the passenger side footwell, I managed to tear the hose that runs from the flap up to the dash . I have looked at the PET diagrams, but am unable to find the chart for that section (maybe I keep skipping over it?). Does anyone know what this part number is, or even better, have removed it and are willing to sell it?

Thanks!
Old 07-29-2014, 02:28 PM
  #2  
jhg41977
Three Wheelin'
 
jhg41977's Avatar
 
Join Date: Nov 2007
Location: Durham, NC
Posts: 1,670
Received 1 Like on 1 Post
Default

I have some, it comes in 2 meter lengths
Old 07-29-2014, 02:29 PM
  #3  
jhg41977
Three Wheelin'
 
jhg41977's Avatar
 
Join Date: Nov 2007
Location: Durham, NC
Posts: 1,670
Received 1 Like on 1 Post
Default

oops, maybe not, didnt realize this was the upfront flap. I have the 72/73mm orange tubing
Old 07-29-2014, 03:22 PM
  #4  
BSL
Three Wheelin'
Thread Starter
 
BSL's Avatar
 
Join Date: Feb 2007
Location: Wayne, PA
Posts: 1,487
Likes: 0
Received 0 Likes on 0 Posts
Default

Yes, this is different than the orange tubing (I still have a bit of that as well). This is a paper-like outside with foil on the inside.
Old 07-29-2014, 05:31 PM
  #5  
Renaud Bizet
Racer
 
Renaud Bizet's Avatar
 
Join Date: Dec 2001
Location: San Diego
Posts: 462
Likes: 0
Received 7 Likes on 4 Posts
Default

Sorry not to hijack the thread. Where did you source the "orange tubing" that goes on the heater flaps at the bottom of the engine?
During last oil change when I took it out to access the engine oil filter I noticed that it is splitting badly.

Thanks !!!
Old 07-29-2014, 06:06 PM
  #6  
bjornebo
Instructor
 
bjornebo's Avatar
 
Join Date: Mar 2011
Location: Eastern Washington
Posts: 226
Likes: 0
Received 0 Likes on 0 Posts
Default

The heater hose that BSL is looking for is shown in Illustration 813-00 on page 386 of the PET- item 12 (p/n 993 572 528 01).
Old 07-29-2014, 08:07 PM
  #7  
Eurotrio
Rennlist Member
 
Eurotrio's Avatar
 
Join Date: Jan 2014
Location: Greenville SC
Posts: 434
Received 24 Likes on 11 Posts
Default

Originally Posted by Renaud Bizet
Sorry not to hijack the thread. Where did you source the "orange tubing" that goes on the heater flaps at the bottom of the engine?
During last oil change when I took it out to access the engine oil filter I noticed that it is splitting badly.

Thanks !!!
I too noticed small tears on the orange short sections of hose....appx 2" long. Crazy, but dealer sells it in 6 feet sections about $200.

I just received some hose sections from Forge to try out. Will report later how it works out.
Old 07-29-2014, 08:12 PM
  #8  
Renaud Bizet
Racer
 
Renaud Bizet's Avatar
 
Join Date: Dec 2001
Location: San Diego
Posts: 462
Likes: 0
Received 7 Likes on 4 Posts
Default

Originally Posted by Eurotrio
I too noticed small tears on the orange short sections of hose....appx 2" long. Crazy, but dealer sells it in 6 feet sections about $200.

I just received some hose sections from Forge to try out. Will report later how it works out.
Cool, sure please report back I am interested to see what I could use. It has to be quite pliable and able to resist the heat too.

Thanks !!!
Old 07-30-2014, 11:39 PM
  #9  
BSL
Three Wheelin'
Thread Starter
 
BSL's Avatar
 
Join Date: Feb 2007
Location: Wayne, PA
Posts: 1,487
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by bjornebo
The heater hose that BSL is looking for is shown in Illustration 813-00 on page 386 of the PET- item 12 (p/n 993 572 528 01).
Ah, thanks George! I saw that diagram, but wasn't associating that run going into the cabin and back to the heat exchanger.



Quick Reply: Heater Hose Part Number



All times are GMT -3. The time now is 01:55 AM.