19" after-market rims on 991.2...?
#1
19" after-market rims on 991.2...?
Can someone help ? I want to retain ride comfort (on our pretty poor roads) and steering feel and, therefore, have stayed with the OEM 19" wheels on my 991.2 C2 manual. Normally, I'd go straight to BBS for a replacement wheel but they are only offering the CH-R style in Europe for 19" but I don't think CH-Rs do a 911 justice.
Ideally, I'd like to keep a '70s vibe going (I've specced a PTS/irish green) and would like a split-rim look. Plus, I really don't want to go to 20".
A further problem is that I'm in the UK and don't want to import from the US or Japan unless I can get a copper-bottomed guarantee that suppliers have already fitted 19" to a 991.2 C2. Most have done 20" on 991.2 4S's which means a much easier ET at the rear. The ET on the C2 and C2S is a weird 76 - very different from '4' body style in the 991.2. Hitting a wall at the moment. All help gratefully received !!
Ideally, I'd like to keep a '70s vibe going (I've specced a PTS/irish green) and would like a split-rim look. Plus, I really don't want to go to 20".
A further problem is that I'm in the UK and don't want to import from the US or Japan unless I can get a copper-bottomed guarantee that suppliers have already fitted 19" to a 991.2 C2. Most have done 20" on 991.2 4S's which means a much easier ET at the rear. The ET on the C2 and C2S is a weird 76 - very different from '4' body style in the 991.2. Hitting a wall at the moment. All help gratefully received !!
#2
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
What about something like this from BBS Motorsport? We ran the 19" E88 on our 991.1 Carrera S in 19"
__________________
SupremePOWER Inc
1562 Kimberly Ave - Fullerton CA 92831
Contact: sales@supremepower.com - Shop# (714)632-1951
World's Largest Retailer/Distributor of BBS Motorsport & Street Wheels from 2015-2023
Huge Inventory: BBS, Kline, Brembo, Soul, Recaro, KW, Akrapovic & 200+ brands. Installation available
** Retail & Wholesale ** Global Delivery ** We match/beat any authorized dealer's price **
SupremePower.com // SupremeForged.com // Follow SupremePower on IG
SupremePOWER Inc
1562 Kimberly Ave - Fullerton CA 92831
Contact: sales@supremepower.com - Shop# (714)632-1951
World's Largest Retailer/Distributor of BBS Motorsport & Street Wheels from 2015-2023
Huge Inventory: BBS, Kline, Brembo, Soul, Recaro, KW, Akrapovic & 200+ brands. Installation available
** Retail & Wholesale ** Global Delivery ** We match/beat any authorized dealer's price **
SupremePower.com // SupremeForged.com // Follow SupremePower on IG
The following users liked this post:
tourenwagen (12-04-2020)
#3
I like your thinking...but there's a 'but' and a big one if your BBS Motorsport...Hey, you know what the Germans are like;-)
Motorsport wheels are NOT designed (as they say) to fulfil 'street work criteria'. They are not guaranteed to hold up against the wear & tear that normal street conditions will throw at a wheel. That's their 'official' line.
I readily acknowledge that Motorsport 'split rims' are designed in such a way that components can be 'cheaply' replaced when track-work takes its toll but handling pot-holes is not part of a track wheel's remit....for kinda obvious reasons. That's their reasoning, and I sort of accept that.
I believe that BBS USA can supply a 11J x 19 (rather than the OEM 11.5J you get on the rears of the 991.2 C2/S) in both the RS-GT and LM-R style but nobody seems to know why Porsche have specced ET76 at the rear on a 991.2, nor have they (as yet) had any experience of putting on a BBS 19" on a 'standard' 991.GEN TWO.
I guess if there's any experience out there so far on a 991.2.... it's been on the 4 and 4S. However, I'm getting nothing more than 'Hey, we've not done a C2 or C2S yet'. Also, the 42-44mm extra width of the '4 cars' means the ET reverts back to ET50 at the rear.... which makes things a lot easier and broadens the rim choice substantially.
I told you things weren't easy didn't I ?? But many thanks for your input so far: it's appreciated.
Motorsport wheels are NOT designed (as they say) to fulfil 'street work criteria'. They are not guaranteed to hold up against the wear & tear that normal street conditions will throw at a wheel. That's their 'official' line.
I readily acknowledge that Motorsport 'split rims' are designed in such a way that components can be 'cheaply' replaced when track-work takes its toll but handling pot-holes is not part of a track wheel's remit....for kinda obvious reasons. That's their reasoning, and I sort of accept that.
I believe that BBS USA can supply a 11J x 19 (rather than the OEM 11.5J you get on the rears of the 991.2 C2/S) in both the RS-GT and LM-R style but nobody seems to know why Porsche have specced ET76 at the rear on a 991.2, nor have they (as yet) had any experience of putting on a BBS 19" on a 'standard' 991.GEN TWO.
I guess if there's any experience out there so far on a 991.2.... it's been on the 4 and 4S. However, I'm getting nothing more than 'Hey, we've not done a C2 or C2S yet'. Also, the 42-44mm extra width of the '4 cars' means the ET reverts back to ET50 at the rear.... which makes things a lot easier and broadens the rim choice substantially.
I told you things weren't easy didn't I ?? But many thanks for your input so far: it's appreciated.
#5
Rennlist Member
#7
Rennlist Member
http://autosportseuropean.com/wheels/porsche/
Trending Topics
#8
Yep: just love that Fuchs-look. Would be interesting to find out the maker since Autoparts seems to be selling 'Victor' wheels on their website...or are these 'Vossen'....? Plus, they don't seem to mention the rear ETs which are really odd on the Gen 2: ie. ET76. Most of the time (and even on the Gen 2 4 and 4S they are ET50) Porsche hover around ET 45 to 55, but they've gone a bit weird on the C2/C2S Gen 2 at the rear. Cannot find out why so far. Any info from the US would be appreciated since I think you've got more opportunities your side to get a physical car to these suppliers to actually check the 'clearances'....
#9
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
#10
I was going to do 19s, but 265/35ZR19 and 325/30ZR19 will make the tire diameter 10mm smaller than stock front/rear. Although they're proportionally smaller (no ECU issues), I'll be left with a 5mm wheel gap larger than OEM. I'm trying to avoid coilovers or KW HAS, but 5mm additional wheel gap would've pushed me to get KW HAS or Bilstein Damptronic. So I settled for 20" track setup.
If you love the mesh look, you really can't go wrong with HRE Classic 300. They're under $7K USD and I'm sure they guarantee their fitment, but be prepared to wait about 8-12 weeks for a set.
I'm not a fan of BBS mesh on a modern 911, sorry. The Convex look to me is "yuck." But to each their own...
If you love the mesh look, you really can't go wrong with HRE Classic 300. They're under $7K USD and I'm sure they guarantee their fitment, but be prepared to wait about 8-12 weeks for a set.
I'm not a fan of BBS mesh on a modern 911, sorry. The Convex look to me is "yuck." But to each their own...
#11
No need to apologise. Wheel designs are hugely subjective.... even on the same car !! I suspect that BBS RS suit 993s more than 991s, although I still think they are the most iconic of wheel designs and much copied which, of course, is the sincerest form of flattery, I guess ;-)
As for the HRE Classic 300, then, yes, I get your point but they're probably more akin to the BBS LM and LM-R than the RS...and, of course, you have our friend at SupremePower extolling the virtues of the Motorsport E88s which are a variation of the same theme, too. I've also looked at HRE 501s which get closer to the 'full mesh' design but they're probably a tad too busy.
My main concern with HRE, Brixton Forged etc. is that there's a lot of mixed reports and misinformation about their 'integral' quality. Whilst it's great to have a CNC-milled billet I hear that rims and the billets themselves come out of a limited range of suppliers whose base capacity to make these components doesn't compete with our German friends....mmm....or maybe that's just scare tactics. I must say that it's heartening to see HRE with a Stuttgart base these days and TUV approval (though oddly Austrian not German TUV...)... Any comfort info you have on HRE quality is always appreciated since side of The Pond :-)
As for the HRE Classic 300, then, yes, I get your point but they're probably more akin to the BBS LM and LM-R than the RS...and, of course, you have our friend at SupremePower extolling the virtues of the Motorsport E88s which are a variation of the same theme, too. I've also looked at HRE 501s which get closer to the 'full mesh' design but they're probably a tad too busy.
My main concern with HRE, Brixton Forged etc. is that there's a lot of mixed reports and misinformation about their 'integral' quality. Whilst it's great to have a CNC-milled billet I hear that rims and the billets themselves come out of a limited range of suppliers whose base capacity to make these components doesn't compete with our German friends....mmm....or maybe that's just scare tactics. I must say that it's heartening to see HRE with a Stuttgart base these days and TUV approval (though oddly Austrian not German TUV...)... Any comfort info you have on HRE quality is always appreciated since side of The Pond :-)
Last edited by BertoneBertoni; 10-24-2016 at 01:57 PM. Reason: grammar
#12
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Join Date: Jul 2015
Location: 2845 S.W. 69th CT. Miami, Fl. 33155
Posts: 3,075
Received 949 Likes
on
479 Posts
No need to apologise. Wheel designs are hugely subjective.... even on the same car !! I suspect that BBS RS suit 993s more than 991s, although I still think they are the most iconic of wheel designs and much copied which, of course, is the sincerest form of flattery, I guess ;-)
As for the HRE Classic 300, then, yes, I get your point but they're probably more akin to the BBS LM and LM-R than the RS...and, of course, you have our friend at SupremePower extolling the virtues of the Motorsport E88s which are a variation of the same theme, too. I've also looked at HRE 501s which get closer to the 'full mesh' design but they're probably a tad too busy.
My main concern with HRE, Brixton Forged etc. is that there's a lot of mixed reports and misinformation about their 'integral' quality. Whilst it's great to have a CNC-milled billet I hear that rims and the billets themselves come out of a limited range of suppliers whose base capacity to make these components doesn't compete with our German friends....mmm....or maybe that's just scare tactics. I must say that it's heartening to see HRE with a Stuttgart base these days and TUV approval (though oddly Austrian not German TUV...)... Any comfort info you have on HRE quality is always appreciated since side of The Pond :-)
As for the HRE Classic 300, then, yes, I get your point but they're probably more akin to the BBS LM and LM-R than the RS...and, of course, you have our friend at SupremePower extolling the virtues of the Motorsport E88s which are a variation of the same theme, too. I've also looked at HRE 501s which get closer to the 'full mesh' design but they're probably a tad too busy.
My main concern with HRE, Brixton Forged etc. is that there's a lot of mixed reports and misinformation about their 'integral' quality. Whilst it's great to have a CNC-milled billet I hear that rims and the billets themselves come out of a limited range of suppliers whose base capacity to make these components doesn't compete with our German friends....mmm....or maybe that's just scare tactics. I must say that it's heartening to see HRE with a Stuttgart base these days and TUV approval (though oddly Austrian not German TUV...)... Any comfort info you have on HRE quality is always appreciated since side of The Pond :-)
We have already done the 991.2 Carrera and have the perfect fitment specs for it as you can see -
HRE is the industry standard when it comes to manufacturing and build quality. Many members on here, many members on other forums, personal clients of mine, and even other brands in the industry cant attest to that.
The HRE Classic 300 in 19" form would look beyond extraordinary on your car. Shoot me over a PM so I can answer more of your questions. Would love to earn your business.
__________________
Wheels Boutique // 786 249 0127 // Sales@wheelsboutique.com
Follow us on YouTube: www.youtube.com/user/WheelsBoutique
Largest Dealer In The World for HRE Wheels, ANRKY Wheels, Vorsteiner Wheels & Aero, Akrapovic Exhaust, & iPE Exhaust
BBS, Forgeline, & TechArt Premium Dealer
Brembo / Rotiform / KW / H&R / Novitec / Brabus / Mansory and tons more...
Wheels Boutique // 786 249 0127 // Sales@wheelsboutique.com
Follow us on YouTube: www.youtube.com/user/WheelsBoutique
Largest Dealer In The World for HRE Wheels, ANRKY Wheels, Vorsteiner Wheels & Aero, Akrapovic Exhaust, & iPE Exhaust
BBS, Forgeline, & TechArt Premium Dealer
Brembo / Rotiform / KW / H&R / Novitec / Brabus / Mansory and tons more...
#13
Can someone help ? I want to retain ride comfort (on our pretty poor roads) and steering feel and, therefore, have stayed with the OEM 19" wheels on my 991.2 C2 manual. Normally, I'd go straight to BBS for a replacement wheel but they are only offering the CH-R style in Europe for 19" but I don't think CH-Rs do a 911 justice.
Ideally, I'd like to keep a '70s vibe going (I've specced a PTS/irish green) and would like a split-rim look. Plus, I really don't want to go to 20".
A further problem is that I'm in the UK and don't want to import from the US or Japan unless I can get a copper-bottomed guarantee that suppliers have already fitted 19" to a 991.2 C2. Most have done 20" on 991.2 4S's which means a much easier ET at the rear. The ET on the C2 and C2S is a weird 76 - very different from '4' body style in the 991.2. Hitting a wall at the moment. All help gratefully received !!
Ideally, I'd like to keep a '70s vibe going (I've specced a PTS/irish green) and would like a split-rim look. Plus, I really don't want to go to 20".
A further problem is that I'm in the UK and don't want to import from the US or Japan unless I can get a copper-bottomed guarantee that suppliers have already fitted 19" to a 991.2 C2. Most have done 20" on 991.2 4S's which means a much easier ET at the rear. The ET on the C2 and C2S is a weird 76 - very different from '4' body style in the 991.2. Hitting a wall at the moment. All help gratefully received !!
The following users liked this post:
SDM5 (03-26-2022)
#14
Rennlist Member
#15
We do make 19 's as well in a variety of styles and production methods. Flow Formed, Vossen x Work 2 piece wheels and our Vossen Forged Series.
Some examples of mesh wheels below in 20" sizes. SEMA is next week and we are debuting some amazing new designs which might be closer to what you are looking for. There are some amazing choices in this thread.
Good luck!
For Vossen Work, I assume the VWS-1 would be most favorable. Its offered in a vast array of colors, finishes and fitments.