WCH BOS

I ordered this and the quality is great. Looks just like the leather part in my car except taller and with the logo.

The problem is that I cannot figure out how to remove the carpet and trim behind the console to install the piece. This is different from swapping out a regular height piece for one with a logo where you can just remove 8 screws. The new piece needs a different part with the hinge to attach.

Anyone have an idea of how to remove the trim???

Porsche_nuts

shaginwagon posted this diy not long ago

https://rennlist.com/forums/991/9349...e-warning.html

WCH BOS

Thanks!!!!

Chris C.

Pics please! Does it look like genuine leather with the stitching??

STG

Is this standard on the .2's??

Some pics I've seen looks like they have this version.

Benedict14

Nicely spotted STG - This has either gone completely unseen, or unmentioned. It also seems like a nice (and relatively affordable) addition to a 991. Especially with the Porsche crest.

STG

Unbelievable. Looked at a bunch of interior .2 pics again. All the higher version. I've never seen this mentioned by anyone.

.2's











My .1

Benedict14

Me too. I looked at mine the other day, and was just geeking out on a 991.2 Vid after reading your post. Then saw the difference.

Think I'm going to do it. Mine doesn't have the crest, and it's going into the shop for a little PSE action anyway

STG

PSE and crest lid? Both good calls.

Where are you buying the PSE? Did you get a good price?

Benedict14

Long story short - bought the main (3) mufflers from a 3000 mile C2S with PSE, who was putting in a Akprovik. Then bought the rest from Sunset. The install hours were 'negotiated'. Its a C2; hence the three mufflers. I've been procrastinating for a while, but now is the time.

I'm really looking forward to the sound.

P.S regarding price - parts were around $1700. Could be worse, I'm sure some could have done better.

STG

Nice! Let us know what you think after the fact.

Benedict14

Will do

WCH BOS

I finally got around to installing this today. The DIY from shaginwagon were excellent. Took me about an hour including set up and clean up. It's dark right now but the new lid matches my Agate grey interior perfectly and has the stitching and logo. Most importantly, my elbow rests at the right level now.

stealthpilot

If this is a 991.2 part, then it will be available in Carrera Red eventually.

stealthpilot

Since some previous posters discovered that this part is a 991.2 part, I looked up the colors it is available for 991.2 and it seems you can get it in Bordeaux Red.

http://www.suncoastparts.com/product/SKUG2991CLR.html

However the thing I wonder is this:

What is Bordeaux Red?

On the 991.1 the two-tone interior was Black/Carrera Red. When you say your car is garnet red, is it really Carrera Red? When I got mine I didn't see Garnet as a red on the configurator.