G55amg

Will like to see a photo of 991 if possible a GT3 in GT Silver with PCCB.
Maybe someone can post a pic.
Thank you
JV

Jimmy-D

Saw a GT Silver Turbo S with the PCCBs, which are standard, and hey looked pretty darn good. I think the Yellow calipers look better than red on a silver car

G55amg

I think my biggest concern is if the yellow calipers will be to much if I choose red stitching and red seat belts ?

<3mph

Here you go. (Can't remember where I grabbed this from anymore (PH?), so can't credit owner.)

G55amg

Thank you

Jimmy-D

If I were going to go with the yellow calipers I would go with yellow seat belts and the silver stitching. I would also do clear tail lights. As you can see I thought this combo thru for a long time a while back

<3mph

No problemo! Hope it helps your decision!

<3mph

I agree with Jimmy on the seat belts and platinum stitching. Red tail lights work fine too IMO. Problem with the clears IMO is the reflectors and third brake light on the wing are still red.

Lodi

Here is the original post with more picts. Credit karlleonard!

https://rennlist.com/forums/991-gt3/...w-991-gt3.html

Here's another set.

http://www.autogespot.com/porsche-99...014/01/12#img1

Jimmy-D

The red reflectors an be ordered at bumperplugs painted to the color of your car. They have some photos. It a couple hundred dollars but painted with the same Porsche matching paint number

CAlexio

These demonstrate how special gt silver really is

FORENN

GT Silver is absolutely stunning on the new GT3.

Jimmy-D

I actually think it would look fantastic on the new Targa with the exposed metal on the outside. It would give it that vintage classy look

G55amg

But the red stitching looks so good, I'm even considering going with non-PCCB.

Jimmy-D

Yes - The red stitching rocks. That was one of the reasons I went with the red calipers and red seatbelts. I tied all the red in to the car with the read tail lights. Plus, I used the $9000 I saved on the PCCBs for all the interior options I wanted.