Wind Tunnel Dyno Pictres
09-03-2016, 09:19 PM
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Wind Tunnel Dyno Pictres
Here are some photos of our wind tunnel dyno that we have at our shop in Torrance, California. If you are in SoCal and you need any performance part installations done, tuning, fabrication, testing or just want to come by one day to check out our facility, everyone is welcome.
Our priority at our shop is customer service and delivering beyond expectations. We have invested in our facility so that we can meet our customers needs.
We have a service center, fabrication facility, capabilities to weld any material and we are constantly upgrading our tuning capabilities as well.
I hope that you enjoy the photos of our dyno.
Please feel free to get in touch with me regarding any of your needs.
Thanks-
-Craig
FULLY FUNCTIONING HIGH SPEED WIND TUNNEL
169,000 CFM at 5" of STATIC PRESSURE
OUTSIDE VIEWING AREA
TWIN TURBO SLS WITH A CUSTOM WORLD MOTORSPORTS TUNE
Our priority at our shop is customer service and delivering beyond expectations. We have invested in our facility so that we can meet our customers needs.
We have a service center, fabrication facility, capabilities to weld any material and we are constantly upgrading our tuning capabilities as well.
I hope that you enjoy the photos of our dyno.
Please feel free to get in touch with me regarding any of your needs.
Thanks-
-Craig
FULLY FUNCTIONING HIGH SPEED WIND TUNNEL
169,000 CFM at 5" of STATIC PRESSURE
OUTSIDE VIEWING AREA
TWIN TURBO SLS WITH A CUSTOM WORLD MOTORSPORTS TUNE
__________________
WORLD MOTORSPORTS
2170 W 190th Street Torrance, CA 90504
(310) 533-8900
- Akrapovic - BMC - TechArt - H&R - By Design - AMS - CSF - Kline - NGK - TiLugs - HRE - M Engineering - ID Injectors -
FULL SERVICE INSTALLATION FACILITY - STATE OF THE ART WIND TUNNEL DYNO - ECU TUNING
WORLD-MOTORSPORTS.COM
2170 W 190th Street Torrance, CA 90504
(310) 533-8900
- Akrapovic - BMC - TechArt - H&R - By Design - AMS - CSF - Kline - NGK - TiLugs - HRE - M Engineering - ID Injectors -
FULL SERVICE INSTALLATION FACILITY - STATE OF THE ART WIND TUNNEL DYNO - ECU TUNING
WORLD-MOTORSPORTS.COM
09-04-2016, 12:32 PM
#2
Burning Brakes
Nice Wind Tunnel. Have you measured the front and rear downforce on stock 991 GT3 and TTS at usual Porsche track speeds of 50 -150 MPH? Very much appreciative you sharing that information.
09-05-2016, 04:02 PM
#3
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
This actually is not for aero testing, it's specifically for engine testing with proper airflow. The airspeed changes to match the test vehicles speed on the dyno to simulate engine power and parameters under realistic road conditions.