Advan Wheels on 991 GTS-Taking Orders Now
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Advan Wheels on 991 GTS-Taking Orders Now
We are selling Advan GT Wheels for the Centerlock 991's. We had these wheels on our Porsche at the 2015 SEMA show and are taking orders now for January deliveries.
The price is $4600.00/set and they can be ordered in any color that you want. These are 20" X 12" rears and 20" X 9.5" (or 9") fronts.
The price is $4600.00/set and they can be ordered in any color that you want. These are 20" X 12" rears and 20" X 9.5" (or 9") fronts.
__________________
WORLD MOTORSPORTS
2170 W 190th Street Torrance, CA 90504
(310) 533-8900
- Akrapovic - BMC - TechArt - H&R - By Design - AMS - CSF - Kline - NGK - TiLugs - HRE - M Engineering - ID Injectors -
FULL SERVICE INSTALLATION FACILITY - STATE OF THE ART WIND TUNNEL DYNO - ECU TUNING
WORLD-MOTORSPORTS.COM
2170 W 190th Street Torrance, CA 90504
(310) 533-8900
- Akrapovic - BMC - TechArt - H&R - By Design - AMS - CSF - Kline - NGK - TiLugs - HRE - M Engineering - ID Injectors -
FULL SERVICE INSTALLATION FACILITY - STATE OF THE ART WIND TUNNEL DYNO - ECU TUNING
WORLD-MOTORSPORTS.COM
#3
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
These wheels are made in Japan, Advan is owned by Yokohama.
#4
What are the exact width and offsets offered vs. the OEM wheels?
#5
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
The rears are
20" X 12" with a 44
The fronts are either-
20" X 9" with a 49
or
20" X 9.5" with a 45
I do not know what the stock wheel offsets are on the GT3.
As you can see in the pictures the wheel offsets are aggressive and fit the car very well.
20" X 12" with a 44
The fronts are either-
20" X 9" with a 49
or
20" X 9.5" with a 45
I do not know what the stock wheel offsets are on the GT3.
As you can see in the pictures the wheel offsets are aggressive and fit the car very well.
#6
Thanks. What's up with the stick-on wheel arch things in the rear? It makes it hard to tell what the rear fitment will actually look like with the OEM fender line. Do you have more pics you can post from different angles, ideally without aftermarket bodywork?
#7
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
No, this wasn't our car so I only have the one picture. I have lots of pictures of the wheels on our TurboS....
Trending Topics
#8
Addict
Rennlist
Lifetime Member
Rennlist
Lifetime Member
Front-- 9J x 20 ET 55mm
Rear-- 12J x 20 ET 47mm
What is the weight on these? Are they made for Yokohama by RAYS? They look a lot like a 5-spoke Volk TE37.
TT
#9
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Stock rims on 991 GT3 are:
Front-- 9J x 20 ET 55mm
Rear-- 12J x 20 ET 47mm
What is the weight on these? Are they made for Yokohama by RAYS? They look a lot like a 5-spoke Volk TE37.
TT
Front-- 9J x 20 ET 55mm
Rear-- 12J x 20 ET 47mm
What is the weight on these? Are they made for Yokohama by RAYS? They look a lot like a 5-spoke Volk TE37.
TT
They weight 21lbs and 23lbs. and they are mold forged.
The difference between mold forged and the forged wheels you usually hear about is that these come out of the mold already in the shape of the rim. Almost everyone else uses a piece of forged aluminum and cuts the design from that. Obviously mold forging is a much bigger investment than just cutting a piece of forged aluminum but the process results in a stronger wheel at the end.
Thanks for the stock offsets.