BBi Autosport Lightweight 3.8 Liter Engine Build for Magnus Walker's 964 Project
#16
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
I believe it is DOS based but we will work with Motec to provide us the proper software.
__________________
Bringing Passion, Artistry, Craft to the Porsche Tuning Industry
Southern California's Porsche Performance Tuning, Engine Development,
ECU Software Tuning, Custom Fabrication, Race Preparation & Factory Service Center
Website: www.bbiautosport.com Email: sales@bbiautosport.com Phone: (714) 843-0200
Follow Us On: Facebook & Instagram
Bringing Passion, Artistry, Craft to the Porsche Tuning Industry
Southern California's Porsche Performance Tuning, Engine Development,
ECU Software Tuning, Custom Fabrication, Race Preparation & Factory Service Center
Website: www.bbiautosport.com Email: sales@bbiautosport.com Phone: (714) 843-0200
Follow Us On: Facebook & Instagram
#18
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Rennlist friends, here are some beauty detailed shots of the bare long block from different angles before we proceed to install Rothsport ITBs and other goodies.
We are making good progress on this engine build and this car is scheduled to debut at the Los Angeles Auto Show November 20-29, 2015.
We are making good progress on this engine build and this car is scheduled to debut at the Los Angeles Auto Show November 20-29, 2015.
#22
Rennlist Member
Ugh, those itb's look awful. I think you meant to get slide valves. Please send them to me to be properly disposed.
p.s. Don't forget the aluminum 3 bolt head to throttle body adapters.
p.p.s. Go ahead and throw in the plenum adapters if you have em lying around.
p.s. Don't forget the aluminum 3 bolt head to throttle body adapters.
p.p.s. Go ahead and throw in the plenum adapters if you have em lying around.
#25
holy $h!t! talk about engine ****...
#29
Addict
Rennlist Member
Rennlist Member