996 blown motor
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
996 blown motor
Just sold my car as a roller today.
I only had the car a few months, and had done the LNE IMS bearing and X51 baffles. First DE of the year; I heard a bang and coasted to a connector road. Turned out I trailed oil and coolant all over the track.
Brief autopsy by my shop showed thrown rod, cracked block and broken crank. Ugh. Not sure of the ultimate cause but I was running R-comps, which may have contributed. No indications of problems before-hand.
Anyway, disappointing for sure, and just venting here. I plan on getting back into a race car, one with a true dry sump. And meanwhile, consoled myself by putting in an order on a new '13 Boxster S.
I only had the car a few months, and had done the LNE IMS bearing and X51 baffles. First DE of the year; I heard a bang and coasted to a connector road. Turned out I trailed oil and coolant all over the track.
Brief autopsy by my shop showed thrown rod, cracked block and broken crank. Ugh. Not sure of the ultimate cause but I was running R-comps, which may have contributed. No indications of problems before-hand.
Anyway, disappointing for sure, and just venting here. I plan on getting back into a race car, one with a true dry sump. And meanwhile, consoled myself by putting in an order on a new '13 Boxster S.
#4
Addict
Rennlist Member
Rennlist Member
This is very sad to hear This is one of the main reasons that I take my car only once or twice a year to open track. I run it hard, without being abusive and give it plenty of rest between sessions These cars were made to run, and they are about the best car to do it in Good luck with the Boxster S
#5
I see plenty of 996 at the track with R compound at the track and no real problem, but I bet that the track configuration plays a role too. if you have long high speed turn where lateral g forces can be maintained for 4 or 5 seconds at time I assume the oil starvation problem could arise.
Lots of horror stories lately on the 996 forum. I'd be curious to know how much you sold the roller for.
IMS uprage is not the ultimate weapon, extended warranties still have a role
Lots of horror stories lately on the 996 forum. I'd be curious to know how much you sold the roller for.
IMS uprage is not the ultimate weapon, extended warranties still have a role
#6
Ah that sucks. What track?
I don't know what I would do in your situation but I'd probably spend the money to build it better, faster, stronger. My wife might feel differently though.
I don't know what I would do in your situation but I'd probably spend the money to build it better, faster, stronger. My wife might feel differently though.
#7
Addict
Rennlist Member
Rennlist Member
Thread Starter
It was at High Plains Raceway, no long sweepers. Agree re: warranties! I considered building it faster but the math really didn't work for me and I personally feel most comfortable with a dry sump oiling system. Phil, I'll PM you what my car went for...
Trending Topics
#9
Rennlist Member
My understanding is that oil starvation occurs on long left hand sweepers and the car is on racing slicks. If you were on Nitto or Toyo R compounds, like NT-01 or RA1's, then the odds are that you had a different issue contribute to the failure.
No matter, it still sucks to hear this. Did you consider a new motor, or were you just ready for a new car?
No matter, it still sucks to hear this. Did you consider a new motor, or were you just ready for a new car?
Last edited by Hal; 05-06-2012 at 09:41 AM.
#11
Addict
Rennlist Member
Rennlist Member
Thread Starter
My understanding is that oil starvation occurs on long left hand sweepers and the car is on racing slicks. If you were on Nitto or Toyo R compounds, like NT-01 or RA1's, then the odds are that you had a different issue contribute to the failure.
No matter, it still sucks to hear this. Did you consider a new motor, or were you just ready for a new car?
No matter, it still sucks to hear this. Did you consider a new motor, or were you just ready for a new car?
I considered a replacement motor but I'd really be SOL if it happened again (I know, very unlikely), so decided against it. A Raby motor would've provided good peace of mind but they are... not inexpensive.
On another note, I test drove a Cayman S and literally frightened the sales guy twice, heh heh (he was fairly new to Porsches). I may have to go do "test drives" regularly this summer (July build slot for the S, this is gonna be hard) while I'm sans-Porsche.
#12
Man I am sorry to hear about the blown engine but good to see you moving forward with a great attitude. Sounds like you are having fun with the test drives. The new generation Cayman definitely interests me and I will have to take a look at it down the road.
#14
Instructor
I noticed the oil pressure needle taking dips last time at the track, and yes, a long lefthand sweeper. Just regular street Pirelli's. Is Accusump the recommended way to go?
#15
Rennlist Member
So unless you are planning on racing slicks, there are cheaper ways to get extra protection / peace of mind. I was lucky and found a RL'er selling a new X51 oil pan. Alternatively, LN Engineering has a deep oil sump kit, and frankly it may be better for DE's than the X51.