What have you done to your 944 S2 Cabriolet?
#572
Freedom Enthusiast
Rennlist Member
Rennlist Member
I just went "all in" in my commitment to set up a MegaSquirt system on my car.
I sold my Rogue tuning "M-tune" kit so I have no choice now.
I sold my Rogue tuning "M-tune" kit so I have no choice now.
#573
Burning Brakes
Join Date: Dec 2009
Location: Montreal, Quebec, Canada
Posts: 1,045
Received 0 Likes
on
0 Posts
Cleaned up engine bay.
Put some new heat shrink on the grounds where the old was crumbling
Did some painting while things are apart.
And the engine is getting bigger.
Put some new heat shrink on the grounds where the old was crumbling
Did some painting while things are apart.
And the engine is getting bigger.
#575
Burning Brakes
Join Date: Dec 2009
Location: Montreal, Quebec, Canada
Posts: 1,045
Received 0 Likes
on
0 Posts
#578
Freedom Enthusiast
Rennlist Member
Rennlist Member
Tested some of the connections for the bixenon HID projector headlights. They are MUCH brighter than the stock lights.
The last picture is similar to the look I hope to achieve.
The last picture is similar to the look I hope to achieve.
#581
Freedom Enthusiast
Rennlist Member
Rennlist Member
ebay. Less than $70 bucks total.
The vendor was http://www.ebay.com/usr/hsjd99?_trks...10.m2749.l2754
Projectors. They look good but included 0,zip,nada,nothing in the way of installation instructions.
http://www.ebay.com/itm/271497426147?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Xenon HID bulb, ballasts, etc. I got 5000K temp/color. It is a little whiter than stock but not obnoxious. They seem to work well and the quality seems good. Time will tell. Instructions included. written by someone who took an english class from a third rate school in China.
http://www.ebay.com/itm/271498993805?_trksid=p2059210.m2749.l2649&var=570333722511&ssPageName=STRK%3AMEBIDX%3AIT
I plan to do a full write-up on the process of installing them.
The vendor was http://www.ebay.com/usr/hsjd99?_trks...10.m2749.l2754
Projectors. They look good but included 0,zip,nada,nothing in the way of installation instructions.
http://www.ebay.com/itm/271497426147?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Xenon HID bulb, ballasts, etc. I got 5000K temp/color. It is a little whiter than stock but not obnoxious. They seem to work well and the quality seems good. Time will tell. Instructions included. written by someone who took an english class from a third rate school in China.
http://www.ebay.com/itm/271498993805?_trksid=p2059210.m2749.l2649&var=570333722511&ssPageName=STRK%3AMEBIDX%3AIT
I plan to do a full write-up on the process of installing them.
#583
Freedom Enthusiast
Rennlist Member
Rennlist Member
I am going to have to figure out a way to seal them completely. There are several openings I have to deal with. I have some ideas I am working through.
Here is my idea for the finished look.
Here is my idea for the finished look.
#585
Freedom Enthusiast
Rennlist Member
Rennlist Member
My Money = --> your fault