GTS Windshield Side Seals $38 a pair
#62
These were professionally high speed (very high speed for over two hours at a stretch) tested across certain desert and mountain roads on the way to Sharks in Ice. They work. Great noise reduction and actually make cleaning the bugs away easier after above mentioned classified high speed runs. Get a set, you won't regret it.
#64
Rennlist Member
I just sent him an email, I hope they are still available.
#67
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
I have plenty in stock.
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
#69
Rennlist Member
Sorry if an enzo, but I was watching this Volvo video the other day and at 1:30, he mentions that on older Volvos, a similar gap was there to collect water and channel it back over the top of the car after the windshield wiper swept it away. The purpose was to keep rain that is swept to the side by the wiper from pouring into cracked-open windows. It made me wonder if the gap on the 928 was originally for this purpose and then later the engineers said screw it and filled it in.
#70
Advanced
Join Date: Dec 2004
Location: Denver and San Francisco
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
You mean no more packaging tape for those long trips. The wind noise on my passenger side of my '87 drives me crazy (or is that just me drive crazy with that wind noise).
Thanks Roger I PMed you for a set
Thanks Roger I PMed you for a set
#71
Rennlist Member
I'm about to install mine. The extrusion looks way too thick to fit in the channel. Particularly an issue towards the top of the channel where the gap narrows on my car. Any insights from those who have installed it?
Any photos/suggestions on the cuts for the top and bottom of the insert?
Thanks!
Bob
Any photos/suggestions on the cuts for the top and bottom of the insert?
Thanks!
Bob
#72
I'm about to install mine. The extrusion looks way too thick to fit in the channel. Particularly an issue towards the top of the channel where the gap narrows on my car. Any insights from those who have installed it?
Any photos/suggestions on the cuts for the top and bottom of the insert?
Thanks!
Bob
Any photos/suggestions on the cuts for the top and bottom of the insert?
Thanks!
Bob
I had a bunch of pictures that I took so I could make a write up for Roger but I can't seem to find them anywhere.
Whatever you do, do NOT force them in or you will crack the windshield.