Cam tower Tightening sequence...???
04-17-2012, 09:19 PM
#1
Thread Starter
Cam tower Tightening sequence...???
anyone have a diagram for the 16v cam tower bolt install sequence? i can't find it in the WSM> i know they are 14.5 ftlbs.........
04-17-2012, 10:09 PM
#2
Rennlist Member
I do not think its in there. just start at the centre working diagonally out to the end in 2 steps say 10 then 14ft lb increments so you pull it down level flat.
