928sRus New Product - Lower Rear hatch Inserts
#31
Race Car
Mine is disintegrated and I removed the remnants and the hatch still closes and opens with the key. Currently the electric latch release is in-op. Can someone tell me what the purpose of this insert is? Does it help with the electric latch release? Less squeaking when driving?
Thanks
Thanks
#32
Racer
In would think there are 2'parts you need.
1:The Teflon tape pads that goes opposite the rubber nubs about 1/2 way down the hatch.
2: The insert discussed here. I think in practice it keeps the plunger centered so it can unlock and raise the hatch. I think this peice also eliminated the side to side motion you may have thus reducing rattle.
1:The Teflon tape pads that goes opposite the rubber nubs about 1/2 way down the hatch.
2: The insert discussed here. I think in practice it keeps the plunger centered so it can unlock and raise the hatch. I think this peice also eliminated the side to side motion you may have thus reducing rattle.
#33
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
#34
Rennlist Member
#35
Rennlist Member
Another product endorsement. I've had the hatch insert sitting in my closet for months and just living with an annoying hatch release that worked about 10% of the time. Finally got around to installing this last weekend.
Works great as advertised. Its nice to have a functional hatch release again. Thanks Roger for continued product research and keeping these cars up and running.
Works great as advertised. Its nice to have a functional hatch release again. Thanks Roger for continued product research and keeping these cars up and running.