aircooler

Hello all,

Here is a little project that I did a few years ago. These pics are of relay name stickers for printing on adhesive paper.



Right click and save the larger file for printing.

Once printed, you can then apply an adhesive laminating material over top of them (or just simple clear packing tape), and just stick them on your relays for easy ID.

I offer no guaranty that they are correct. I don't have the time to check them for accuracy, nor correct any problems if any. Please don't ask.

The first pic is of the sheet for web viewing. The second is for saving to print.

Cheers,
Michael




Link to full size sheet 1985-86.jpg



Link to full size sheet 87-88.jpg



Link to full size sheet 1989.jpg



Link to full size sheet 1990.jpg



Link to full size sheet 1991.jpg



Link to full size sheet 1992-95.jpg

Now don't go mess around with trying to print on specific Avery label paper.

This is too easy.

Just print a test page on regular plain paper. Cut one of the relay stickers out to make sure your printer has sized the full sheet of relays to a good size for a real relay. If it has, then you are good to go.

Pick up (at Staples, Office Depot, etc) a packet of Avery "FULL SHEET LABELS" like these below...



Print a whole page of relay stickers on one page of Avery "full sheet label" paper. Once you have printed the relays, run some clear packing tape over the printed relay stickers to laminate them. (You can also buy Avery full sheet laminating film, but packing tape should be fine)

Now you just cut the relays stickers out of the full sheet, peel the backs, and stick them to your relays.

I do recommend leaving the relays in the car while applying the stickers. It makes the whole process allot easier. Also, make sure you dust/clean the top of the relays so that the adhesive with stick well.

BTW if anyone wishes to make changes, the font is DENMARK. Common to MSWord.

Cheers,
Michael

JWise

Cool, thanks!

Herman K

I like that, thanks for sharing...

Kevin Michael

Excellent.

ew928

Cool.
Now if only someone like 3M will make kevlar reinforced sticker paper we can wrap around the whole relay so the top can doesn't pull out from the base.

aircooler

BTW, the relays that are part # 141.951.253.B are all highlighted in reverse so you can see what relays are interchangable for trouble shooting.

Cheers,
Michael

leperboy

Very cool. Aircooler, do you mind if I use your template to make an 85-86 set of stickers to post for us early 32V'ers?

Matt

aircooler

Have at'er man

Cheers,
Michael

Leon Speed

Cool, thanks a lot

Rick Carter

I look forward to it, thanks!

Manfred

Thank you many times over.

kccampro

Many thanks!!!!

Marine Blue

Thank you Michael, very much appreciated!

This also helped me to realize that the two fuel pump relays I bought for my S4 will also work in the GT.

mark kibort

That was very cool to do this. Im printing it out and sticking it to my false fuse box cover in my race car!

blown 87

Now I have another thing to do before I can make SITM.

Thanks man, neat idea.