The Best Sounding Exhaust Contest
03-25-2008, 05:42 PM
#31
Race Director
I thought Louies was quite a bit quieter than Tims Beast.......when the beast was 1st debuted at SATL 06 Tim was leading the fun drive about 8 sharks ahead of me.....we were stuck in traffic behind someone REALLy slow....I hear this massive BWWAAAAHHH then see the beast pass the slow poke....it was louder 8 cars back than mine is IN THE CAR..... it literally shakes the ground.....(in a good way)
. I think you could resuscitate someone with the exhaust pulses just by laying them down behind the car.. 
03-25-2008, 05:43 PM
#32
Official Bay Area Patriot
Fuse 24 Assassin
Rennlist Member
Fuse 24 Assassin
Rennlist Member
Thread Starter
If you suggest a SITM sound contest, that's awesome. But this thread is for online clips.
Like I said, maybe I can arrange a free membership with Randy V or John D to give out to a member on here with a great clip.
To continue into a little more detail about the thread:
- Post your clips on here
- Rennlisters listening can PM me on what clips sound the best
- I will take a take a tally of the clips voted and post the top 10 in a nomination thread that spans off from this one.
- Winner of that thread gets the prize (if there is any approval from the mods for one)
03-25-2008, 05:57 PM
#34
Official Bay Area Patriot
Fuse 24 Assassin
Rennlist Member
Fuse 24 Assassin
Rennlist Member
Thread Starter
I still haven't heard Sterling's car.
I'm going to make a clip of mine tonight with my own X-pipe and Flowmaster S-40s.
I'm going to make a clip of mine tonight with my own X-pipe and Flowmaster S-40s.
03-25-2008, 06:53 PM
#35
Three Wheelin'
You know, that is the ONLY time I have ever heard that thing run...sounds good.
http://www.928sg.com/928sg.wav
and uh, if you work in an office you might wanna try this one from home... only if your kids aren't sleeping.....
its not a very good recording....
and its only revved to 3500 RPM... but you get the idea
and uh, if you work in an office you might wanna try this one from home... only if your kids aren't sleeping.....
its not a very good recording....
and its only revved to 3500 RPM... but you get the idea
03-25-2008, 07:30 PM
#36
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
http://www.928sg.com/928sg.wav
and uh, if you work in an office you might wanna try this one from home... only if your kids aren't sleeping.....
its not a very good recording....
and its only revved to 3500 RPM... but you get the idea
and uh, if you work in an office you might wanna try this one from home... only if your kids aren't sleeping.....
its not a very good recording....
and its only revved to 3500 RPM... but you get the idea
03-25-2008, 07:47 PM
#37
Rennlist Member
I have been trying to record mine for some time now, I just dont have the equipment to record. But Im going to try with my cell phone now.
Really, I was just posting so I could subscribe to the thread, I think Im going to like this one!!
Really, I was just posting so I could subscribe to the thread, I think Im going to like this one!!
03-25-2008, 07:57 PM
#39
Three Wheelin'
Join Date: Jan 2007
Location: not where you think I am
Posts: 1,466
Likes: 0
Received 0 Likes
on
0 Posts
http://www.928sg.com/928sg.wav
and uh, if you work in an office you might wanna try this one from home... only if your kids aren't sleeping.....
its not a very good recording....
and its only revved to 3500 RPM... but you get the idea
and uh, if you work in an office you might wanna try this one from home... only if your kids aren't sleeping.....
its not a very good recording....
and its only revved to 3500 RPM... but you get the idea
sounds like you could work on smoothing out the idle.....seems to hunt around a lot----vacuum leak, perhaps?.
I'd post mine, but most of you heard it at 3rd Coast........
--Russ
03-25-2008, 09:19 PM
#41
Rennlist Member
Brian (or anybody else)- Do you know what setup Dennis K is running? I love that howl, and I suspect it's something I could replicate with my GT.
And Sterling, that motor sounds downright MEAN. I can only imagine what it sounds like in person. Well done, sir!
And Sterling, that motor sounds downright MEAN. I can only imagine what it sounds like in person. Well done, sir!
03-26-2008, 12:04 AM
#43
Three Wheelin'
03-26-2008, 12:29 AM
#44
Three Wheelin'
+1
Russ,
Don't take this the wrong way.... but this is just another example where you don't know anything about these cars. I have custom cams, a motec, and no MAF. Vacuum leak is not an issue... oh, BTW its idling @ 650 RPM's with my big cams so it idles just fine thank you very much.
You would do yourself a huge service if you didn't compare your experince with SBC's and Perterbuilts to our cars until you learn enough about them to do so.
No animosity, just calling it like I see it. and just to put it out there, I don't like the sidepipes, I'm just been trying to be polite and not say anything but since you go out of your way to step on toes and **** everyone off, I thought I'd share it with you...
Don't take this the wrong way.... but this is just another example where you don't know anything about these cars. I have custom cams, a motec, and no MAF. Vacuum leak is not an issue... oh, BTW its idling @ 650 RPM's with my big cams so it idles just fine thank you very much.
You would do yourself a huge service if you didn't compare your experince with SBC's and Perterbuilts to our cars until you learn enough about them to do so.
No animosity, just calling it like I see it. and just to put it out there, I don't like the sidepipes, I'm just been trying to be polite and not say anything but since you go out of your way to step on toes and **** everyone off, I thought I'd share it with you...
