V2Rocket

Don't want to keep this stuff around anymore.
Spent lots of money over the years with ideas in mind for projects that never happened.

The more that you can take at once, the better. I only ask you cover the shipping cost for these items.

There are more interior parts than are pictured - you can have them all.

The PS lines and pump are as-removed from my car. I converted my PS rack to "manual" years ago and these have been in a box since 2005.

There are 2x shifter rods with good-shape, straight pins. One of them has a bolt tapped into the end because the circlip got lost...the bolt/washer retains the lever into the black shift tube thing.

The expansion tank is in good shape, it is filthy and has a rusty sleeve in the hose barb but it is intact and free is cheaper than a new one

Steering wheels have great shape rims and the horn pads are nice, one brown one black. The catch is, the "back side trim" of both wheels is cracked/missing so you would need to swap yours over.

Dougs951S

might be interested in one of the shifters, need to see how fubar'd the old one from the 951 is.

kyle a. w.

I'm interested in the p/s lines. Are they in decent condition?

V2Rocket

They are in good shape.
The only thing not included is the PS "cooler" loop...it had a cut in the tube so I threw it out.

Where in SD are you? I can bring these down with me next time I go visit in Poway.

16again2009

I'll take the steering wheel on the right.

fristajlo

Would you mind checking shipping cost to Sweden for one of the shifters?
Do you have any ***** for the dash or the clips that hold the sun visors?

V2Rocket

As noted...the back "plastic trim" needs replacement as it has cracks.
You can have it...PM me for paypal shipping info

V2Rocket

I can get the clips from a friend's place for a few dollars if you want.
Shipping should be $20 or less, I'd think, for a shifter rod.
Also, if you want it, I have a hatch release motor you can have for free too (saw your other thread).

fristajlo

thanks, I'll pm you. Would be interested in the clips if not too expensive. Just to clarify, it's the clips that sits to the centre of the car that I'm after. Would love the motor too, if mine doesn't work. Need to test it first
No **** for the fan?

CVR_Rally

I am in need of the three spoke steering wheel for the 83 project.

kyle a. w.

I'm right off the 15 between Mira Mesa Blvd and mercy rd.

lonestar944

I would be interested in the brown steering wheel if available.

Tiger03447

If you are looking for sunvisor clips..Know that they changed those in 85 also..diameters of the rod holes are different ..larger after 85..FWIW

V2Rocket

Stuff is gone!