3D Printing 924 & 944 Parts - Development and Discussion
#196
Freedom Enthusiast
Rennlist Member
Rennlist Member
#197
Freedom Enthusiast
Rennlist Member
Rennlist Member
I had noticed that my printer seemed to print a mirror image of what was being show on the screen but it wasn't a big deal printing plugs and grommets.
My wife finds my backwards Porsche Crest to be amusing.
My wife finds my backwards Porsche Crest to be amusing.
#199
RL Community Team
Rennlist Member
Rennlist Member
I previously shared the 3D Printer Files (STL) in this thread so anyone with a printer can make their own. If you don't have access - I put a few up on eBay.
Cheers!
#200
Pro
Thread Starter
I've shipped a few to Europe.
#201
Rennlist Member
I work for a major enterprise-level mechanical CAD company and am responsible for their 3D printing strategy. Feel free to let me know if you guys have any questions.
Printing replacement parts that are no longer available or difficult to find is an awesome use-case for additive manufacturing, so reading through this thread has been very instructive.
Printing replacement parts that are no longer available or difficult to find is an awesome use-case for additive manufacturing, so reading through this thread has been very instructive.
#202
Rennlist Member
Pulling this one out of the half-dead bin, but did we ever get anywhere with cup holders???
Yeah... I know..... but it's a major issue with me that our cars don't have these!!!
Yeah... I know..... but it's a major issue with me that our cars don't have these!!!
The following users liked this post:
curtisr (10-08-2019)
#204
Rennlist Member
Prototype 944 85.5+ cup holder
Prototype Porsche 944 Cup holder for 3D printing.
Basically it's designed to clip onto the storage bin in the door.
Again, use at your own risk. I haven't printed or tested these yet and I have no idea if they'll work on early models (before 85.5) as my car is an 86.
#206
Rennlist Member
Funny you should ask. I just got done drawing this up in CAD the other day. I haven't had a chance to try printing it out yet.
Prototype Porsche 944 Cup holder for 3D printing.
Basically it's designed to clip onto the storage bin in the door.
Again, use at your own risk. I haven't printed or tested these yet and I have no idea if they'll work on early models (before 85.5) as my car is an 86.
Prototype Porsche 944 Cup holder for 3D printing.
Basically it's designed to clip onto the storage bin in the door.
Again, use at your own risk. I haven't printed or tested these yet and I have no idea if they'll work on early models (before 85.5) as my car is an 86.
#210
Rennlist Member
This started life as a marine drink holder..I use one of these screwed to the hood of my riding lawn mower..so it will definately take the bumps and weird angles. Has any one seen the one on E-Bay that fits into the below radio cubby for 20.00?