Video: Tightening the oil-water radiator of a Porsche 944
11-24-2014, 02:26 PM
#1
Video: Tightening the oil-water radiator of a Porsche 944
Hi,
The video gives you a step by step tutorial how to tighten the oil-water radiator of a Porsche 944. There are different versions of the radiator, the video shows the work for an early model II. The work itself isn't quite difficult, but the access is rather limited. The video shows that the job is possible without further disassembling.
The video has a German soundtrack but English subtitles are added to YouTube. If you don't see them by default, watch the video directly at YouTube and press the cc-button below the frame.
Enjoy it,
Jürgen
The video gives you a step by step tutorial how to tighten the oil-water radiator of a Porsche 944. There are different versions of the radiator, the video shows the work for an early model II. The work itself isn't quite difficult, but the access is rather limited. The video shows that the job is possible without further disassembling.
The video has a German soundtrack but English subtitles are added to YouTube. If you don't see them by default, watch the video directly at YouTube and press the cc-button below the frame.
Enjoy it,
Jürgen
11-24-2014, 03:23 PM
#2
Just a car guy
Rennlist Member
Rennlist Member
Join Date: Jan 2002
Location: South Lyon, Michigan, Ewe Ess Eh
Posts: 9,927
Received 835 Likes
on
524 Posts
Very nice. Looks as though a timing belt replacement was part of that job.
I did a write-up on this a few years ago for another forum. It was just text and photos. There were exhaust and engine mount work involved with mine.
Hopefully this offers another perspective on the same task (without the use of a pit or lift).
http://reutterwerk.com/forums/showthread.php?t=10723
I did a write-up on this a few years ago for another forum. It was just text and photos. There were exhaust and engine mount work involved with mine.
Hopefully this offers another perspective on the same task (without the use of a pit or lift).
http://reutterwerk.com/forums/showthread.php?t=10723
