1988 924s dme ECU help
#1
1988 924s dme ECU help
She has fuel pumping to the rail, spark, will run on starting fluid, but noid light shows no power at the fuel injectors.
Put in new DME relay, opened up dme/ecu computer, looked for bad solder joints, no change.
I would like to buy or borrow a new ECU to make sure that is not the problem.
I did just buy a 944 ECU, but it has three rows of pins and does not fit.
I will pay for your time, or the part, or whatever...if you can use the 944 computer, great.
I am in West Milford, NJ...
Need some help here, getting frustrated!
Love the car, want to drive it!
Put in new DME relay, opened up dme/ecu computer, looked for bad solder joints, no change.
I would like to buy or borrow a new ECU to make sure that is not the problem.
I did just buy a 944 ECU, but it has three rows of pins and does not fit.
I will pay for your time, or the part, or whatever...if you can use the 944 computer, great.
I am in West Milford, NJ...
Need some help here, getting frustrated!
Love the car, want to drive it!
#2
David pagan 944 no inj pulse
Hello,
Do you have any power at the injector plugs , ( check them all ) allot times in these cars the wire harness going to the injectors rots ( and the wires in the harness to the injectors becomes detached .) THUS NO PULSE ,
Some times if you wiggle the harness you'll see the momentary contact happening.
Dp951
Do you have any power at the injector plugs , ( check them all ) allot times in these cars the wire harness going to the injectors rots ( and the wires in the harness to the injectors becomes detached .) THUS NO PULSE ,
Some times if you wiggle the harness you'll see the momentary contact happening.
Dp951