924 window button repair?
#1
924 window button repair?
So finally got around to working on the windows, and I think i found the reason they were not working. A fuse was dead. So i replaced it and then i turned the ignition and smoke came out of the button, and it killed the new fuse. so i took it apart and one of the pins was upside down. Is it dead? Any way to fix it or do i need to hunt down a new one?
Heres what it looks like.
Heres what it looks like.
#4
David pagan 924 window switch
Hello, by looking at your pic the plastic pin that hold the spring and ball looks melted , when the buttons get too hot and the stem melts ( high resistance ) , your better off getting one that doesn't have that damage so the spring can move up and down freely thus giving a firm contact ...hey but keep the contacts for spares. I had the same issue with the ealry 944s , also make sure you check and clean the fuse contacts , to insure a good electrical contact. ( 16 amp fuse )