Refinished my Phone dial rims
#1
Refinished my Phone dial rims
Just repainted my phone dials and I am very happy with the results. I used Dupli-color Hyper Silver spray paint kit.
Total cost= $20 + my labor.
Total cost= $20 + my labor.
#4
Rennlist Member
Did you go through several iterations of paper...e.g. 200, 500, then 1000 grit?
How many coats of color did you put down? Hard to tell...then top off with 1 or 2 coats of clear?
How many coats of color did you put down? Hard to tell...then top off with 1 or 2 coats of clear?
#5
I didn't use any paper at all. Here is exactly what I did:
1. Jack car up and remove wheel
2. Cleaned wheel front and back 3x with a good de-greaser, a brush and a garden hose. Remove wheel weights and glue using some wd-40 and Brillo pad.
3. Dried it off with my leaf blower
4. Removed all the air from the tire so I can push the tire in slightly around the rim and place some cards around it [to mask it off] [see pic] I also taped off the center cap Porsche crest.
5. Gave the rim 4 light even coats of Dupli-color hyper silver paint
6.Wait 30 minutes
7. Gave the rim 4 light even coats of Dupli-color clear
8. Refill with air using my Viair pump [I highly recommend you buy this air pump-its the best]
That's it. No sanding, no buffing - nada.
I already put about 100 miles on them and washed them once and so far they have held up just fine. Here is a pic from today - they are a little dirty but easy to clean up with soap and water.
1. Jack car up and remove wheel
2. Cleaned wheel front and back 3x with a good de-greaser, a brush and a garden hose. Remove wheel weights and glue using some wd-40 and Brillo pad.
3. Dried it off with my leaf blower
4. Removed all the air from the tire so I can push the tire in slightly around the rim and place some cards around it [to mask it off] [see pic] I also taped off the center cap Porsche crest.
5. Gave the rim 4 light even coats of Dupli-color hyper silver paint
6.Wait 30 minutes
7. Gave the rim 4 light even coats of Dupli-color clear
8. Refill with air using my Viair pump [I highly recommend you buy this air pump-its the best]
That's it. No sanding, no buffing - nada.
I already put about 100 miles on them and washed them once and so far they have held up just fine. Here is a pic from today - they are a little dirty but easy to clean up with soap and water.