Hello Rennlist - 914 community,
Here's the projects latest update. Please, excuse the picture sizes as some were taken on my phone and others on a point & shoot camera.
Here you can see the 35+ years of Germany's finest glue coming off the aluminum trim from the A pillar. Also, if anyone is looking for near perfect 914 aluminum trim pieces PM me.
These are the clear tail lights that came in from Auto Atlanta. They'll fit right in for that modern look we're going for.
Cutting out the trunk floor pans
Removing the rear view mirror from the windshield, boy was that fun....NOT!
Removing the wire harness
And completely out! Pictures don't show the work it took to get this all out in one piece justice. PM me if you're interested in this.
Several Engine pics just in from Lozano Brothers Porting. Here you can see the cylinder head porting they have done.
Here is the oil pump being fit, notice no oil pan as it is currently being CNC'd for bottom clearance.
Oil Pump side view, and no you're not trippin' out, the picture is upside down to show the engine right side up.
Here is the block with the iron sleeves fitted
This is the carbon fiber dash that will bring that race car elegance to our project, can't wait till it's finished!
What the dash will primarily look like. (Picture taken from another forum member's car).
Here is a pic from Neo914's car. This is what we need for our new headlights, if anyone knows anyone who has / makes or is willing to produce a pair please PM me.
Air intake box idea from BBI's fabricator, "The_Fabricator" of Instagram, we'll be utilizing two of these for the twin turbo set up
Throwing around some ideas for the turbos, how cool would this be!?
Photo courtesy of EuroTuner
One thing is for sure though, our welds wont look like this!
And how could I leave you without your daily afternoon dose of eye candy. This pic should really be rated NSFW, but her top is still on so I guess it's okay?