When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You're welcome. I have been trying to eye-research which sizes I want, and I really desire a meaty setup. They look perfect with your ride height. Did you have to do any adjustment to the torsion bar itself, or can that height be obtained just from the adjustment screws?
Sorry for all the questions, I am new to my SC, and very eager!
You're welcome. I have been trying to eye-research which sizes I want, and I really desire a meaty setup. They look perfect with your ride height. Did you have to do any adjustment to the torsion bar itself, or can that height be obtained just from the adjustment screws?
Sorry for all the questions, I am new to my SC, and very eager!
Just the adjustment screws in front. I had to re-index the rear bars because the eccentric bolt adjustment on the later spring plates wasn't enough. (I actually was raising it up in the front and rear because the previous owner had it on the bump stops )
Just the adjustment screws in front. I had to re-index the rear bars because the eccentric bolt adjustment on the later spring plates wasn't enough. (I actually was raising it up in the front and rear because the previous owner had it on the bump stops )
Really? sounds to me like the p/o was form over function. Thanks for the answers! I'll be playing with the adjustments to see if they are going to be enough then.